Discover Pro, Digital Cluster, and 9.3-inch display for U.S. MK VII Golf
I've (almost) successfully done the Gen-2 Discover Pro and Digital Cluster in my 2016 Golf-R.
https://youtu.be/b66e8qXNjCk I built the MOST cable loop extension to go from the glovebox to the cluster, so my Navigation is all good in the Dash. Purchased the Displays from Stevens Creek VW and the Disco Pro from Alex at APG.
Everything works well and I have no immobilizer or component protection faults (used a VAS 6154 and ), but I am having an issue with the fuel gauge and depiction of . The adaptation entries for the "Offset for fuel tank calibration values-Offset sensor 1" (and 2) both are 12.7L and should be -12.8. However, when I attempt to change them, I can't. Both and other tools accept "25327" as a security Login, but the Adaptation returns a Login error.
The other issue is that the animated graphic for the position of the vehicle being tracked by is "stuck" at really close to you, rather than moving vertically in the display, based on distance.
I have the complete coding and Adaptation Values from a 2018 Tiguan SEL Premium w/Technology Package as well as a 2018 eGolf SEL Premium that I've compared coding with, and I think I have everything coded coded correctly, except for the Offset sensor values, which I know are wrong and need to figure out how to fix. If anyone has any insight, it would be greatly appreciated. It seems like "Complete tank calibration" and/or "Wet dry tank calibration" might have something to do with it, but I can find no documentation.