iichel
- Messages
- 4,778
- Reaction score
- 5,189
Latest activity Postings About
-
-
iichel replied to the thread VW UP Auto 2012 no crank.can you read live values from the clutch position and the neutral sensor? -
iichel replied to the thread Passat B8: multicolor ambient light retrofit.Yeah BM is fine for RGB
-
iichel replied to the thread 2012 Scirocco Dynaudio retrofit sound issues.Yes
-
iichel replied to the thread ABS control unit coding lost.I have an excel sheet that was reverse engineered.
-
menu_display_ACC menu_display_ACC_after_disclaimer menu_display_ACC_operation_clamp_15_off menu_display_ACC_over_threshold_high...
-
iichel replied to the thread 2020 Caddy Cruise Retrofit.Also run a wire from 16 to 01 according to the correct diagram.
-
iichel replied to the thread 2013 golf acc removal..Engine without CC/ACC: Coding: 01110012030505092000 ABS with front assist, without ACC: Coding...
-
iichel replied to the thread 2011 Skoda Fabia steering angle faukt after steering pump replacement.You're very welcome.
-
iichel replied to the thread 2011 Skoda Fabia steering angle faukt after steering pump replacement.Coding 11240 -> 10140
-
iichel reacted to RGH0's post in the thread MK60EC1 ABS Swap (AD to BL) – Coding reverts to zeros & G251 sensor error with
Like.
I already gave you the hint - buy a genuine VCDS then you can get the help you need here -
iichel replied to the thread MK60EC1 ABS Swap (AD to BL) – Coding reverts to zeros & G251 sensor error.Could you post a full scan please of before and after?
-
iichel replied to the thread Dual rear fog lights, but no leucheset for that particular lamp?.I'd just pull a wire from left to right if it's not already there an be done with it.
-
iichel replied to the thread Temporarily disable Haldex by VCDS long coding?.I looked up the diagram and it seems I was wrong. The caddy only has a +15 feed, by the looks of it, from SC13. I'm used to having a...
-
-
iichel replied to the thread Dual rear fog lights, but no leucheset for that particular lamp?.Just one fog light, on the driver side, is probably just a cost thing. Some luxury cars have two, one on either side.
-
iichel replied to the thread Temporarily disable Haldex by VCDS long coding?.Yes but thats the +15 feed. It also has a +30 feed. You'll need to pull that fuse.
-
-
Loading…
-
Loading…
