I picked up a used 2006 Audi A3 for my daughter which has the original keys. Both keys start the car and unlock the doors. The remotes do not work.
Easy fix, I replaced the batteries. No joy...
I read about the manual procedure to program with one key in the ignition, doing the other, tried that and it didn't work.
Then I tried VCDS following the same procedure here:
https://www.youtube.com/watch?v=jdakPlMnDr4
After clearing the remotes (group 000), setting group 001 to 2, I can click on the unlock button of each remote and the turn signals flash.
Yay, it worked right? No. Neither remote will work.
I've tried the procedure with key in the ignition, key out of the ignition (once the VCDS is done) and always within the 15 sec limit.
What am I missing here? Thanks.
Easy fix, I replaced the batteries. No joy...
I read about the manual procedure to program with one key in the ignition, doing the other, tried that and it didn't work.
Then I tried VCDS following the same procedure here:
https://www.youtube.com/watch?v=jdakPlMnDr4
After clearing the remotes (group 000), setting group 001 to 2, I can click on the unlock button of each remote and the turn signals flash.
Yay, it worked right? No. Neither remote will work.
I've tried the procedure with key in the ignition, key out of the ignition (once the VCDS is done) and always within the 15 sec limit.
What am I missing here? Thanks.