Jetta 97

Hi there, So according to the Official Factory Repair Information for the 2007 Audi Q7, you first have to follow the "Pre-bleeding"...

Same 2007 Q7 you've posted about elsewhere? I don't see any Basic Settings documented for bleeding brakes at all. Are you sure this...

Yes, IIRC, one goes to the cluster for the temp gauge there and the other to the ECU. By all means, unplug it and see what changes...

Have you verified the wiring between the sensor and the ECU? That fault code could easily be due to a broken wire. Log requested and...

That is your problem, on Mk4 nothing but original form Dealer will not work. So save your time , go to dealer and buy original sensor...

Is the Replacement Sensor an OE Part or some aftermarket part? If the later, we often refer to these as Chinese Replacement Auto Parts...

I'm actually somewhat surprised by how many legitimate customers we have in Romania these days. A few of the the countries you share...

Makes perfect sense! I appreciate the all that info. I'm familiar with baud rates and stuff of that nature. I reached out to...

Tthere is nothing you can do now, Car need new DPF .

Do you have black soot at tail pipe ? If you do ,your DPF is cracked .

After i flashed the engine ecu, car work without errors thanks all for support

Due to the 03-ABS and 53-Parking brake relationship in regards to the clutch pedal position (for CCS and starter control) I would try to...

I think 03L 906 022 JM software might be a a better fit but MJ isn't far off. This highlighted 26.05.2008>> - 03.11.2008 VIN split temp...

There are engine ECUs that cannot be re-coded. Also, it is necessary to modify the wiring. I drove such a car before, my coding in...

God bless her.