Steering wheel swap mfsw 2010 gti to 2007

Status
Not open for further replies.
   #1  
S

smiles77

Verified VCDS User
Verified
Joined
Jan 21, 2016
Messages
41
Reaction score
11
Location
USA
VCDS Serial number
C?ID=268542
I purchased a 2010 gti multifunction steering wheel for my 2007 vw rabbit 2 door non steering wheel controls- low line mfd. After purchase of the new airbag and installation at the dealer neither the air bag is connected nor does the horn work. I am mainly interested in the ability to adjust radio volume and change stations. I have a Kenwood DNX 892 installed but have not gotten the Crutchfield connector for the Kenwood yet.

What do I need. Attached is the VCDS printout. I have entertained the thought of replacing the instrument cluster to get hi line mfd but that would involve additional tweaks.

Code: 
VCDS Version: Release 15.7.3 (x64) Running on Windows 10 x64
Data version: 20151216
www.Ross-Tech.com

Saturday,23,January,2016,21:07:04:54023

Chassis Type: 1K (1K0)
Scan: 01 02 03 08 09 15 16 17 19 25 42 44 46 52 56

VIN: WVWBS71K07W128421   Mileage: 122490km-76111miles

00-Steering Angle Sensor -- Status: OK 0000
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: Malfunction 0010
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
42-Door Elect, Driver -- Status: Malfunction 0010
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine        Labels: 06A-906-032-BGP.lbl
   Part No SW: 07K 906 032 Q    HW: 07K 906 032 Q
   Component: 2.5l R5/4V      G   9650  
   Revision: --H01---    Serial number: VWZ7Z0F8206643
   Coding: 0000003
   Shop #: WSC 01279 785 00200
   VCID: 3753DE08469E838680-8062

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: 09G-927-750.clb
   Part No SW: 09G 927 750 FL    HW: 09G 927 750 FL
   Component: AQ 250 6F           0920  
   Revision: 00H69000    Serial number:               
   Coding: 0000072
   Shop #: WSC 01279 785 00200
   VCID: 002175D453D0043E71-8054

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 1K0-907-379-MK60-F.lbl
   Part No SW: 1K0 907 379 AC    HW: 1K0 907 379 AC
   Component: ESP FRONT MK60      0101  
   Revision: 00H11001    
   Coding: 0021122
   Shop #: WSC 01279 785 00200
   VCID: 73CB2A1812662FA67C-8026

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC        Labels: 1K0-820-047.lbl
   Part No: 1K0 820 047 GR
   Component: Climatic PQ35   120 0606  
   Shop #: WSC 00000 000 00000
   VCID: 7AD5073C350C5EEE3F-802E

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect.        Labels: 3C0-937-049-23-M.lbl
   Part No SW: 3C0 937 049 AD    HW: 3C0 937 049 AD
   Component: Bordnetz-SG     H52 2002  
   Revision: 00H52000    Serial number: 00000006361334
   Coding: 108D0F214004150047140000001400000008730B5C0001
   Shop #: WSC 26149 444 58612
   VCID: 6BFB32784A56F766B4-803E

   Subsystem 1 - Part No: 1K1 955 119 E  Labels: 1KX-955-119.CLB
   Component: Wischer 201106 020  0501  
   Coding: 00038805
   Shop #: WSC 26149  

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags        Labels: 1K0-909-605.lbl
   Part No SW: 1K0 909 605 AB    HW: 1K0 909 605 AB
   Component: 5L AIRBAG VW8R  034 8000  
   Revision: 05034000    Serial number: 003B6D07EA7S  
   Coding: 0013644
   Shop #: WSC 01269 785 00200
   VCID: 6CF931644F58F05EBD-8038

   Subsystem 1 - Part No: 1K0 959 339 G
   Component: BF-Gewichtsens. 007 0007

   Subsystem 2 - Serial number: 6332MSME145B616CH

   Subsystem 3 - Serial number: 6342MSME150E642FJ

   Subsystem 4 - Serial number: 6352QSME18723C45J

   Subsystem 5 - Serial number: 6362QSME182F3961N

   Subsystem 6 - Serial number: 63727SME0B2F4510+

   Subsystem 7 - Serial number: 63827SME0B252217Y

2 Faults Found:
00588 - Airbag Igniter; Driver Side (N95) 
            001 - Upper Limit Exceeded - MIL ON
01587 - Igniter 2 for Airbag; Drivers Side (N250) 
            001 - Upper Limit Exceeded - MIL ON

-------------------------------------------------------------------------------
Address 16: Steering wheel        Labels: 1K0-953-549-MY8.lbl
   Part No SW: 1K0 953 549 AF    HW: 1K0 953 549 AF
   Component: Lenksäulenmodul 636 0070  
   Coding: 0010022
   Shop #: WSC 01279 785 00200
   VCID: 76CD130C01143A8E5B-8022

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments        Labels: 1K0-920-xxx-17.lbl
   Part No SW: 1K0 920 953 P    HW: 1K0 920 953 P
   Component: KOMBIINSTRUMENT VDD 1610  
   Revision: V0003000    Serial number: VWZ7Z0F8206643
   Coding: 0007207
   Shop #: WSC 20113 444 100840
   VCID: 3851DD344B808CFE89-806C

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway        Labels: 1K0-907-530-V2.clb
   Part No SW: 1K0 907 530 K    HW: 1K0 907 951 
   Component: J533__Gateway   H04 0020  
   Revision:   H04 02    Serial number: 16100602000223
   Coding: 3F0F034007000000
   Shop #: WSC 01279 785 00200
   VCID: 2F43E668BECE4B46D8-807A

1 Fault Found:
01305 - Databus for Infotainment 
            004 - No Signal/Communication
             Freeze Frame:
                    Fault Status: 01100100
                    Fault Priority: 1
                    Fault Frequency: 254
                    Reset counter: 40
                    Mileage: 122292 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 16:36:31


-------------------------------------------------------------------------------
Address 25: Immobilizer        Labels: 1K0-920-xxx-25.clb
   Part No SW: 1K0 920 953 P    HW: 1K0 920 953 P
   Component: IMMO            VDD 1610  
   Revision: V0003000    Serial number: VWZ7Z0F8206643
   Shop #: WSC 07332 001 1048576
   VCID: 3851DD344B808CFE89-806C

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver        Labels: 1K0-959-701-MIN3.lbl
   Part No SW: 1K0 959 701 M    HW: 1K0 959 701 M
   Component: Tuer-SG         005 0967  
   Coding: 0001077
   Shop #: WSC 01279 785 00200
   VCID: 3851DD344B808CFE89-806C

1 Fault Found:
00928 - Locking Module for Central Locking; Front Driver Side (F220) 
            008 - Implausible Signal - Intermittent

-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 1Kx-909-14x-44.clb
   Part No: 1K1 909 144 L
   Component: EPS_ZFLS Kl.070 H07 1806  
   Shop #: WSC 26149 444 92471
   VCID: 3449E90457E8689EA5-8060

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels: 1K0-959-433-MIN.clb
   Part No: 1K0 959 433 CM
   Component:    KSG              0401  
   Coding: 93C803281B09058F880A048050CC
   Shop #: WSC 07332 001 1048576
   VCID: 7DDF0C20242269D61A-8028

   Subsystem 1 - Component:   Sounder n.mounted     

   Subsystem 2 - Component:       NGS n.mounted     

   Subsystem 3 - Component:      IRUE n.mounted     

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass.        Labels: 1K0-959-702-MIN3.lbl
   Part No SW: 1K0 959 702 M    HW: 1K0 959 702 M
   Component: Tuer-SG         005 0967  
   Coding: 0001076
   Shop #: WSC 01279 785 00200
   VCID: 3957D830708A95F676-806C

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio
Cannot be reached

End-------------------------(Elapsed Time: 00:56)--------------------------

Code: 
VCDS Version: Release 15.7.3 (x64) Running on Windows 10 x64
Data version: 20151216
www.Ross-Tech.com

Saturday,23,January,2016,21:07:04:54023

Chassis Type: 1K (1K0)
Scan: 01 02 03 08 09 15 16 17 19 25 42 44 46 52 56

VIN: WVWBS71K07W128421   Mileage: 122490km-76111miles

00-Steering Angle Sensor -- Status: OK 0000
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: Malfunction 0010
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
42-Door Elect, Driver -- Status: Malfunction 0010
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine        Labels: 06A-906-032-BGP.lbl
   Part No SW: 07K 906 032 Q    HW: 07K 906 032 Q
   Component: 2.5l R5/4V      G   9650  
   Revision: --H01---    Serial number: VWZ7Z0F8206643
   Coding: 0000003
   Shop #: WSC 01279 785 00200
   VCID: 3753DE08469E838680-8062

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: 09G-927-750.clb
   Part No SW: 09G 927 750 FL    HW: 09G 927 750 FL
   Component: AQ 250 6F           0920  
   Revision: 00H69000    Serial number:               
   Coding: 0000072
   Shop #: WSC 01279 785 00200
   VCID: 002175D453D0043E71-8054

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 1K0-907-379-MK60-F.lbl
   Part No SW: 1K0 907 379 AC    HW: 1K0 907 379 AC
   Component: ESP FRONT MK60      0101  
   Revision: 00H11001    
   Coding: 0021122
   Shop #: WSC 01279 785 00200
   VCID: 73CB2A1812662FA67C-8026

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC        Labels: 1K0-820-047.lbl
   Part No: 1K0 820 047 GR
   Component: Climatic PQ35   120 0606  
   Shop #: WSC 00000 000 00000
   VCID: 7AD5073C350C5EEE3F-802E

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect.        Labels: 3C0-937-049-23-M.lbl
   Part No SW: 3C0 937 049 AD    HW: 3C0 937 049 AD
   Component: Bordnetz-SG     H52 2002  
   Revision: 00H52000    Serial number: 00000006361334
   Coding: 108D0F214004150047140000001400000008730B5C0001
   Shop #: WSC 26149 444 58612
   VCID: 6BFB32784A56F766B4-803E

   Subsystem 1 - Part No: 1K1 955 119 E  Labels: 1KX-955-119.CLB
   Component: Wischer 201106 020  0501  
   Coding: 00038805
   Shop #: WSC 26149  

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags        Labels: 1K0-909-605.lbl
   Part No SW: 1K0 909 605 AB    HW: 1K0 909 605 AB
   Component: 5L AIRBAG VW8R  034 8000  
   Revision: 05034000    Serial number: 003B6D07EA7S  
   Coding: 0013644
   Shop #: WSC 01269 785 00200
   VCID: 6CF931644F58F05EBD-8038

   Subsystem 1 - Part No: 1K0 959 339 G
   Component: BF-Gewichtsens. 007 0007

   Subsystem 2 - Serial number: 6332MSME145B616CH

   Subsystem 3 - Serial number: 6342MSME150E642FJ

   Subsystem 4 - Serial number: 6352QSME18723C45J

   Subsystem 5 - Serial number: 6362QSME182F3961N

   Subsystem 6 - Serial number: 63727SME0B2F4510+

   Subsystem 7 - Serial number: 63827SME0B252217Y

2 Faults Found:
00588 - Airbag Igniter; Driver Side (N95) 
            001 - Upper Limit Exceeded - MIL ON
01587 - Igniter 2 for Airbag; Drivers Side (N250) 
            001 - Upper Limit Exceeded - MIL ON

-------------------------------------------------------------------------------
Address 16: Steering wheel        Labels: 1K0-953-549-MY8.lbl
   Part No SW: 1K0 953 549 AF    HW: 1K0 953 549 AF
   Component: Lenksäulenmodul 636 0070  
   Coding: 0010022
   Shop #: WSC 01279 785 00200
   VCID: 76CD130C01143A8E5B-8022

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments        Labels: 1K0-920-xxx-17.lbl
   Part No SW: 1K0 920 953 P    HW: 1K0 920 953 P
   Component: KOMBIINSTRUMENT VDD 1610  
   Revision: V0003000    Serial number: VWZ7Z0F8206643
   Coding: 0007207
   Shop #: WSC 20113 444 100840
   VCID: 3851DD344B808CFE89-806C

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway        Labels: 1K0-907-530-V2.clb
   Part No SW: 1K0 907 530 K    HW: 1K0 907 951 
   Component: J533__Gateway   H04 0020  
   Revision:   H04 02    Serial number: 16100602000223
   Coding: 3F0F034007000000
   Shop #: WSC 01279 785 00200
   VCID: 2F43E668BECE4B46D8-807A

1 Fault Found:
01305 - Databus for Infotainment 
            004 - No Signal/Communication
             Freeze Frame:
                    Fault Status: 01100100
                    Fault Priority: 1
                    Fault Frequency: 254
                    Reset counter: 40
                    Mileage: 122292 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 16:36:31


-------------------------------------------------------------------------------
Address 25: Immobilizer        Labels: 1K0-920-xxx-25.clb
   Part No SW: 1K0 920 953 P    HW: 1K0 920 953 P
   Component: IMMO            VDD 1610  
   Revision: V0003000    Serial number: VWZ7Z0F8206643
   Shop #: WSC 07332 001 1048576
   VCID: 3851DD344B808CFE89-806C

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver        Labels: 1K0-959-701-MIN3.lbl
   Part No SW: 1K0 959 701 M    HW: 1K0 959 701 M
   Component: Tuer-SG         005 0967  
   Coding: 0001077
   Shop #: WSC 01279 785 00200
   VCID: 3851DD344B808CFE89-806C

1 Fault Found:
00928 - Locking Module for Central Locking; Front Driver Side (F220) 
            008 - Implausible Signal - Intermittent

-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 1Kx-909-14x-44.clb
   Part No: 1K1 909 144 L
   Component: EPS_ZFLS Kl.070 H07 1806  
   Shop #: WSC 26149 444 92471
   VCID: 3449E90457E8689EA5-8060

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels: 1K0-959-433-MIN.clb
   Part No: 1K0 959 433 CM
   Component:    KSG              0401  
   Coding: 93C803281B09058F880A048050CC
   Shop #: WSC 07332 001 1048576
   VCID: 7DDF0C20242269D61A-8028

   Subsystem 1 - Component:   Sounder n.mounted     

   Subsystem 2 - Component:       NGS n.mounted     

   Subsystem 3 - Component:      IRUE n.mounted     

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass.        Labels: 1K0-959-702-MIN3.lbl
   Part No SW: 1K0 959 702 M    HW: 1K0 959 702 M
   Component: Tuer-SG         005 0967  
   Coding: 0001076
   Shop #: WSC 01279 785 00200
   VCID: 3957D830708A95F676-806C

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio
Cannot be reached

End-------------------------
 
Last edited by a moderator:
   #2  
Uwe

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
49,725
Reaction score
34,022
Location
USA
VCDS Serial number
HC100001
I don't think your Steering Wheel Module (at address 16) supports the Multi-Function Steering Wheel:
http://wiki.ross-tech.com/wiki/index.php/Steering_Wheel_Control_Module_Versions

Whether that's also the source of your airbag issues is questionable.

I have no idea if it's possible to make your aftermarket radio respond to the controls from the steering wheel once you upgrade the Steering Wheel Control Module. You'd need some sort of protocol converter that listens on your car's Infotainment CAN for VW's "language" and turns it into something your radio understands.

-Uwe-
 
   #3  
S

smiles77

Verified VCDS User
Verified
Joined
Jan 21, 2016
Messages
41
Reaction score
11
Location
USA
VCDS Serial number
C?ID=268542
Uwe,
I looked at various sites and found that SW controller 1K0 953 549 CH might work. I would need a new air bag harness also. I do not have the part number. Regarding the radio- Crutchfield does sell a converter for VW that should work. Hopefully the clock spring will be compatible and the cruise stalk will still work. i just might get a new instrument panel to get full function from the new steering wheel.
Thanks,
Gregg
 
   #4  
Dana

Dana

Administrator
Staff member
Administrator
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
6,049
Reaction score
9,075
Location
Western PA, USA
Hi Gregg,

The factory #16 module (1K0-953-549-AF ) supers to 1K0-953-549-BK which would be the best replacement module if you were installing a LIN 1.3/Mk5 steering wheel. That would be the easier way to go and MFA/MFSW controls using the DDP protocol would be compatible with the factory protocols in the comfort system, radio and instrument cluster.

Since you want to put a LIN 2.0/Mk6 wheel on the vehicle the direct replacement path won't work. You need a Highline unit that supports a Steering Angle Sensor and the proper LIN Version .. and after looking at that Wiki chart I agree with 1K0-953-549-CH. Keep in mind however that Mk6 vehicles used BAP for internal communication which may complicate things later with radio and MFA integration.

Either way - as long as the slip ring, pigtail wiring harness and Airbag type (dual versus single Igniter) are compatible with the installed #16 control module and Airbag system you shouldn't have Airbag or ABS issues.

If you haven't done so already I would consider plugging the original components back in to see if those fault codes clear:

00588 - Airbag Igniter; Driver Side (N95)
001 - Upper Limit Exceeded - MIL ON
01587 - Igniter 2 for Airbag; Drivers Side (N250)
001 - Upper Limit Exceeded - MIL ON
Click to expand...

If they do not clear you know something unrelated to the new parts it to blame.
 
  • Like
Reactions: Uwe
   #5  
S

smiles77

Verified VCDS User
Verified
Joined
Jan 21, 2016
Messages
41
Reaction score
11
Location
USA
VCDS Serial number
C?ID=268542
Dana,

Thanks for the response. It seems that I should get a MK5 steering wheel with MF and a BK module versus a MK6 wheel with MF and a CH module- less problems with other systems.

I am mainly interested in controlling radio function- volume and program selection. Also phone call receive and initiation. Crutchfield sells an adaptor for VW for the Kenwood DNX 892 which I had installed.
Thanks,
Gregg
 
   #6  
Jetta 97

Jetta 97

Professional User
Professional VCDS User
Joined
Apr 22, 2014
Messages
1,557
Reaction score
1,551
Location
Dallas (McKinney) ,TX ,USA
VCDS Serial number
C?ID=81680
smiles77 said:
Uwe,
I looked at various sites and found that SW controller 1K0 953 549 CH might work. I would need a new air bag harness also. I do not have the part number. Regarding the radio- Crutchfield does sell a converter for VW that should work. Hopefully the clock spring will be compatible and the cruise stalk will still work. i just might get a new instrument panel to get full function from the new steering wheel.
Thanks,
Gregg
Click to expand...
You will need Steering Module and clock spring , and yes 1K0 953 549 CH will work and it is best option, but Cruise control stalk has to me modified.

Do you know is your original Airbag Dual or single?

I just retrofit My car , My car was none MFSW, you can look at here:
http://forums.ross-tech.com/showthr...K6-Color-premium-cluster-MK6-MFSW-and-RNS-315
 
  • Like
Reactions: Uwe
   #7  
B

BRMTDI

Verified VCDS User
Verified
Joined
Aug 1, 2015
Messages
45
Reaction score
4
Location
USA
VCDS Serial number
C?ID=247677
I just completed one of these swap...

00588 - Airbag Igniter; Driver Side (N95)
001 - Upper Limit Exceeded - MIL ON

This is the only error I am left with...

Clock Spring was changed to version C revision...

MFSW is CH...

I have done this swap on my own car without issue...this is now being done on a clients car....sorry to Hi Jack the thread...hoping since we are already talking about it...

I can post a auto scan soon...

I am thinking I have a bad slip ring, but this is my second replacement, first one was china new, one after that was used, but not sure if was working...guy who sold it said it was good.

6CRJ23rLDGubbTRBGbVqfqOiZOuxqwFTWsKsXhQRxaN6jqHv_QEdqhy0GDRIlB1YKfY_fjr1IMjKyeY9opaib0Q34i9XjGytgBcCGIrX1wQ17w21uOzUff8EIipiV3TjPKomguil5ZfK-dcOG8zl3ElScddbh1AvSqnzwY__sFYGDQ889siagyoHFAPYjBUqHn7LI1hAn1PgQEwWFQR23MxMbCkkiTiXUYqRs-Prmd3CqQlRu0jKUzf5YVfKGCAMCe5xZ41s3qqfD7NAaoBouLAgQKkA-V4v5PtIUaqqUky1OC6wza9yQR3-Zp3KPW0jqpCWW2XxgMW8_iwpXlmY3VdYVhCdQZgJgjnWi1AIXRgpicGmInWTJDt6qjYSKQxTKC1lCYAGZwyaWnAaVmBZjfiUXM6Y-vwEqw67zdpi9815YJFvLqSfd2aVYUSHDXfg-zKWDrwmvYOlcAAsJGuiis28XGaWF3DnxyZbXHqmAURvE8Ysari0VkSvG_-f7UpG5zdPB7k76l1JRw8nFnkzGe9eQIQ5zUeTxcuuOW612BciK7Zq7uyXET7WSq26lTtBbe9H=s530-p-rw

_Ym3bpW-B5so4AzQeL2533wayqVZtNOTb3Fpd_hGuajgpw4fV2DQOSXGtbi0BcAUxZ4a98E-4N1QJnSlo4lQqdviqETFF8lsr8YEnNy86AXhowZOyBegLrHfI51wM4WfKFM77m42-bNjOXU87uhR2nIEn8FmHV-Knw3xEY9ai_ZX85UfbB9Cazrlsje2DbFBrHVAloe-I-cOu_F3iOL98S1rlwst9FZ3KYYOL2DH3rT6leWAaIQ8F9cM_lRfJwKuewm7DqYZ8yMTeAakThlAtsCKsjrNrlb1jEpURyGGYaAYwemcuG2vF0L4JmGLZRJckNrmhZjw2ReInDcjEtWPf7AvqwH-HVheCMPFWBl5aPwBHqJBKy2BqS6R2hQOahWRnsRByJ-Gj_Ps7F7U3bNOxP7S3pLHQ5CuFJpzFi1VkUtV8bHpiY491FNXxGnFgFgvQi-FibxA599DQqUnNrvq2xIjP1vanlqfKo5TRYU6ZbpszChqe7SQmCrK4ZZ44j2noUMrTrU5MZL3A4HvwTnPUONWN4Db3ew7iaNAMF0ZBzBhdLzUYyefPxXPbc0IaUVkbK1O=s530-p-rw

3qHCt_Y3tS5u98AwkvJiZkeuFDPVGELIrNptalNfcC4Md1i2uP2ojw2sxXwmZ80UiJf8kQ-bgdoLogDH3DtFTWa3Yi7mXP1stmi_RTHQz7ArKoTw_GBNiGhDjFR418a4jd_ifJ75_6ZxAy1UDwDHljt4q5O_2l7pZbkLuZ1fDbCw-44hPfnBFjQZ5Cpi0SGfJrN_6hohwz5v3iM87wiaOQ-ViDfhD2V66BZPjr9ODuCvfMAnkR0E7nNIjMb--iR5vsU84jqFqk3R-Ggzcni1M08oD2EQv1LRKvQdzmjMCzFKqJt2tnZ2RwwRnnyuir7rHo4rk3oGscJMtXDr3PZ2JCQpYHsW2KN51eVUJ_2rZdiR1LlZ09QkFols34QusgJcLxkI4OodAjNyd49g7sXsfznVMa0Wpj5drFTXyBDAr5ddoxanF1LQbh7B7RMY3A1gvM_4O5Q8gAsFVNgkvV8aVNL9owlmYAeNyk19M8Nx-DpNT70gCyoaSJo9un_2f5dOh1xyz6GoQtEuJ5SpLWoGgJ_PKAt0WfgWU8a0KFeEDkwJtKcXqgd-5Q-RjUTV2LKtefc7=s530-p-rw


This last part is a 3D Cluster I got it working on my own car but has to be programmed with a car with a BCM after that everything works...

I am swapping Kessey and Kessey BCM next so you should see that project on here...I already did a Kessey swap on a Golf MK6 with Golf R Kessey Systsem not too bad of a job, lots of wiring lol.

q53xzAYJfLvSrdvjzqgVbfQoSCGDf-N9alCbFy0vOLyqb9XNVi69-1uMFTGHA11EQq_nF5Xc29R9vXrKm1nMScGhcu_nzCfagNKrjzoY1Kean2uShh9d4hwuTjBNaScZCp0H0x_3tyWiuC9qNVNEf-4oYUntTkK8NU4L2BYJ4zyvbd1ST3K5BaOM_crpl0AK9pj8nK86Ge_gBglXGod-Rco-4EBj-zxg6fYE-xUtxUKYSqgjnhlk0ii2qadS34Se6Ql-xTdZ_wJaiTZ9z9wLXq5CxyJLKio0TQZ7OgkUzyNuoCDP4zXNf5GeIE_lUn4gvUB-nt4HGOx3RR_ojnpyBqQk_kKTy-LM-uy7GXCPRyj0hAy1BBD9PlV7ysQqoCNzS8Y9q-9lxIMdmMWaGs0euxHH_0LMJkbd30kullEI4W1hcx4JrRamf7rkpJvjFbxqu91Q726K_lBfhPScsjFfzfVApPQ4rXp5JM0rXTU7Ci-VJWlG-5945yRLsgEJDUEPws3jkVqFAQXyN4pZL5S95JuG1CbEzUEU-lEz_bNfoGbwrBZ8WOH7OSs801l-NDWGGtrc=s530-p-rw


Anyway I just need your opinion on that code what you guys think it could be.
 
Last edited:
   #8  
Jetta 97

Jetta 97

Professional User
Professional VCDS User
Joined
Apr 22, 2014
Messages
1,557
Reaction score
1,551
Location
Dallas (McKinney) ,TX ,USA
VCDS Serial number
C?ID=81680
On Steering module CH 2 pins missing to connect to for Clock spring. You have to see what pin goes form Air bag to clock spring , ( check continuity) and see are they go to this missing pins, if Yes , then form old Steering module you can add pin in CH.
 
  • Like
Reactions: Uwe
   #9  
B

BRMTDI

Verified VCDS User
Verified
Joined
Aug 1, 2015
Messages
45
Reaction score
4
Location
USA
VCDS Serial number
C?ID=247677
I can do that...but its very strange this should be plug and play...

I did this on two other cars without issue...

But yes this is something to try...I did notice the spacing on the CH module for the slip ring is in a different location by spacing I min the active pins are in different locations it seems.....

I have the tool kit to pull pins...so your saying remove pins from old module transfer to new one CH?

Do you know what OHM's I should be getting on the air bag lines, resistance too high..I was reading could be a bad ground.
 
   #10  
Jetta 97

Jetta 97

Professional User
Professional VCDS User
Joined
Apr 22, 2014
Messages
1,557
Reaction score
1,551
Location
Dallas (McKinney) ,TX ,USA
VCDS Serial number
C?ID=81680
it should be 2.7-3 ohm.
But your faulty code telling me Airbag is not connected.
Is your original dual or single stage Airbag, and same question for SILES77?
 
Last edited:
   #11  
S

smiles77

Verified VCDS User
Verified
Joined
Jan 21, 2016
Messages
41
Reaction score
11
Location
USA
VCDS Serial number
C?ID=268542
My airbag is dual igniter.
 
   #12  
Jetta 97

Jetta 97

Professional User
Professional VCDS User
Joined
Apr 22, 2014
Messages
1,557
Reaction score
1,551
Location
Dallas (McKinney) ,TX ,USA
VCDS Serial number
C?ID=81680
Last edited:
   #13  
Dana

Dana

Administrator
Staff member
Administrator
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
6,049
Reaction score
9,075
Location
Western PA, USA
Thanks for the help here Marin!

BRMTDI, your picture links did not work. I got redirected to a Google Login so you may need to get a share links to post in forum. Either way, please do post your scan if you still need assistance.
 
   #14  
B

BRMTDI

Verified VCDS User
Verified
Joined
Aug 1, 2015
Messages
45
Reaction score
4
Location
USA
VCDS Serial number
C?ID=247677
Just realized original air bag was dual stage...this one is single stage....so I have to add a resistor to this?
 
   #15  
B

BRMTDI

Verified VCDS User
Verified
Joined
Aug 1, 2015
Messages
45
Reaction score
4
Location
USA
VCDS Serial number
C?ID=247677
Yeah Google Drive Pics Issue, will try IMGUR now

2015 Cluster
TCNRSx1


Sorry about the size...IMGUR and Google Photo is being a pain with me for some reason

Yeah but I am starting to think my issue with this car is original air bag was dual stage new one is single stage...maybe why? For resistance too high message?

I got everything else sorted ABS is fine....only issue now is it starts the initiation test for ABS but never completes it, maybe I need a bigger parking lot.
 
Last edited:
   #16  
Jetta 97

Jetta 97

Professional User
Professional VCDS User
Joined
Apr 22, 2014
Messages
1,557
Reaction score
1,551
Location
Dallas (McKinney) ,TX ,USA
VCDS Serial number
C?ID=81680
BRMTDI post your auto scan to see what codes you have.
And yes if you have dual stage airbag , you need to use solution I post link above.
 
   #17  
B

BRMTDI

Verified VCDS User
Verified
Joined
Aug 1, 2015
Messages
45
Reaction score
4
Location
USA
VCDS Serial number
C?ID=247677
I'm still confused what the solution really is...an I support to use the original air bag harness and add resistors to it...

Maybe I did not read the correct section.

Will post auto scan when I get home tonight.
 
   #18  
golfi_vend

golfi_vend

Verified VCDS User
Verified
Joined
Apr 9, 2014
Messages
2,310
Reaction score
2,259
Location
Tartu, Estonia
VCDS Serial number
C?ID=195131
I've done same mod, modded stalk and CH SWCM.

If your old bag is dual stage, then you will have to use resistor because there ISN'T NO NEWER STYLE bag with 2-stage igniter. There isn't and will never come as MK6 is outdated.
The 2 stage igniter is like 2in1 bag. Both igniters are separate units and controlled separately
 
   #19  
B

BRMTDI

Verified VCDS User
Verified
Joined
Aug 1, 2015
Messages
45
Reaction score
4
Location
USA
VCDS Serial number
C?ID=247677
golfi_vend said:
I've done same mod, modded stalk and CH SWCM.

If your old bag is dual stage, then you will have to use resistor because there ISN'T NO NEWER STYLE bag with 2-stage igniter. There isn't and will never come as MK6 is outdated.
The 2 stage igniter is like 2in1 bag. Both igniters are separate units and controlled separately
Click to expand...

We'll this car has a MK6 CC Stalk, MK6 Wheel...what did you have to do on the CH module? I am not really getting any error's on the module...the only thing I notice on it..is it missing a few pins where the old one had some for the slipring hookup..

Again as far as adding a resistor....If anyone can message or post pics of what the single stage harness needs to look like with resistors. Having a little trouble visualizing out how the wiring has to be modified.
 
   #20  
B

BRMTDI

Verified VCDS User
Verified
Joined
Aug 1, 2015
Messages
45
Reaction score
4
Location
USA
VCDS Serial number
C?ID=247677
BRMTDI said:
We'll this car has a MK6 CC Stalk, MK6 Wheel...what did you have to do on the CH module? I am not really getting any error's on the module...the only thing I notice on it..is it missing a few pins where the old one had some for the slipring hookup..

Again as far as adding a resistor....If anyone can message or post pics of what the single stage harness needs to look like with resistors. Having a little trouble visualizing out how the wiring has to be modified.
Click to expand...


Found this in the R32 Forums I assume I have to add resistors to this....2.2ohm?

MFSWmoduleold_zpsb3a8dd27.jpg
 
Status
Not open for further replies.
Back
Top