- Joined
- May 16, 2014
- Messages
- 5,469
- Reaction score
- 5,936
- Location
- Melbourne, Australia
- VCDS Serial number
- C?ID=194404
I'm interested to know whether it's at all possible with a VCDS cable to rebuild the code in a control module using the vehicle's VAG PR numbers alone? It's a doable thing (I suspect that this is the way that it's done by the good VW folk in the Weiter Land) but does VCDS do it?
Some of the Bit descriptors on the Long Coding Helper screens (which are replete with PR-this & PR-that) give the tantalising suggestion that the cable does do this - If so, is there a place on the RT website where verified VCDS users who have not been naughty can access the how-to instructions?
Don
Some of the Bit descriptors on the Long Coding Helper screens (which are replete with PR-this & PR-that) give the tantalising suggestion that the cable does do this - If so, is there a place on the RT website where verified VCDS users who have not been naughty can access the how-to instructions?
Don
Last edited: