MK7 2015 GTI another ABS long coding request

Status
Not open for further replies.
   #1  

yakface

Pirate
Walking the Plank
Joined
Jan 10, 2022
Messages
1
Reaction score
0
Location
Colorado, USA
I have a stock LHD North America 2015 GTI S
I changed the MIB1 radio to an Android head unit. As a result, I now have to reset the TPMS through VCDS. The last time I did, I messed up and accidentally reset the whole ABS module, resulting in all zero's on the long coding. A nice stranger on the internet provided me with one based on my VIN and while it did resolve some of the CEL/MIL the ESC and TPMS lights are still on and there are numerous codes still thrown. I believe the long coding he provided includes ACC, which my car does not have.

I searched the forums and read the WIKI on this issue. Any help would be appreciated to dial the long coding in a little better.
Ive attached my ABS scan and a clean AUTOSCAN below:

Code:
Removed.  Data from a clone/pirate copy of VCDS is not acceptable here.

Code:
Removed.  Data from a clone/pirate copy of VCDS is not acceptable here.
 
Last edited by a moderator:
   #2  

JMR

Professional User
Professional VCDS User
Joined
Sep 27, 2021
Messages
4,083
Reaction score
2,422
Location
Romania
VCDS Serial number
C?ID=432218
Hello and welcome to the forum. Since you are not a verified member you have to wait a bit until an admin approves of your scan ( to make sure it's done with an official interface @Uwe ) and only then we can proceed in helping you further. Jumping to help without an approved interface will create problems for us as verified users since the head of the forum is a Benevolent Dictator and that could suddenly change to only Dictator :)
 
Last edited:
  • Like
Reactions: Uwe
   #3  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
49,702
Reaction score
34,017
Location
USA
VCDS Serial number
HC100001
   #4  

JMR

Professional User
Professional VCDS User
Joined
Sep 27, 2021
Messages
4,083
Reaction score
2,422
Location
Romania
VCDS Serial number
C?ID=432218
Man ...and I was ready to help him ...
 
Status
Not open for further replies.
Back
Top