JMR

What will release the magic smoke first? The fuse for the DLC, or the scan tool? -Uwe-

Scan tool :thanks:

I can do when I'm next with the car , it's been driven to the body shop now , I cleared 26623 but soon as I cleared it I started the car...

I d teach you something..but you re responsible ..put pin 16 to pin 4 and pin 4 in pin 16 in your obd port..for sure it ll give them...

Ya but in Neu Jezzy rules The Sopranos :D

That's normal in an Mk.4 car. All diagnostic communications is via the K-line on pin 7 of the diagnostic socket. -Uwe-

I'll test pins 3, 21, and 62 using pin 1 as the ground with the ignition in the ON position. I don't think you will be wasting your...

You need to test if you get also ground on pin 1 which is important. You need to test the VCC pins getting ground from the vehicle...

https://www.ecstuning.com/b-bosch-parts/abs-pump-control-unit-electronic-portion-only/8e0998375g~bos/ Or send it to Germany for repair...

No, that's the name of the label file VCDS is using, not the part number of your ABS module. Your ABS module is: -Uwe-

I posted a link with your ecu pinout. Unplug the ecu and see if you get power and ground on the indicated pins . Put your ignition on...

@davisev5225 now , i cannot seem to convince the romanian govt to transfer my american god given rights on their land :cool:

It's every American's God-given right... Location: Romania Oh. My condolences. Your gun laws are rather strict. :(

Come visit here, I'll lend you some. :D -Uwe-

James, VCDS & the community is providing you support and insights.... you're just being a snowflake about us having some fun with it. So...