Reset self-learning values of ECU

Hello everyone, I'm new here.

I have a question / problem, maybe someone knows how to solve it. I want to reset the self-learning values of the ECU of my golf tsi, to do this I have seen that you have to go to Engine-adaptation-idle speed adjustment and save channel 00 (as in the image).

But when I try to do it I can't find the idle speed adjustament tab, in my vagcom I only get this options:


I am doing something wrong?

Greetings and thank you

Are you doing something wrong? Yes, I think so. First thing update your VCDS to the latest version. See here...

https://www.ross-tech.com/vcds/download/current.php

Viking said:

Are you doing something wrong? Yes, I think so. First thing update your VCDS to the latest version. See here...

https://www.ross-tech.com/vcds/download/current.php

Click to expand...

Hello, I have updated the vagcom but I am still the same, the way to reset the learning values is the one indicated in the main message?

Can you show an autoscan please? See below

I don’t think it’s the correct value you’re looking at.
Idle speed adjustment is to raise or lower the idle speed RPM to accomodate for tighter engine mount for example.

That was available for older mk5 Golfs but not for Golf6 and onwards which have UDS Adaptation

iichel said:

Can you show an autoscan please? See below

Click to expand...

Yes

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
13-Auto Dist. Reg -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
20-High Beam Assist. -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
4B-Multifunc. Module -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000

downtime said:

I don’t think it’s the correct value you’re looking at.
Idle speed adjustment is to raise or lower the idle speed RPM to accomodate for tighter engine mount for example.

That was available for older mk5 Golfs but not for Golf6 and onwards which have UDS Adaptation

Click to expand...

Do you know how you could correctly remove the self-learning values from the ecu? Thank you

Can you post an Autoscan please, not just the gateway installation list.

https://forums.ross-tech.com/showthread.php?101-How-to-post-an-Auto-Scan

downtime said:

I don’t think it’s the correct value you’re looking at.
Idle speed adjustment is to raise or lower the idle speed RPM to accomodate for tighter engine mount for example.

That was available for older mk5 Golfs but not for Golf6 and onwards which have UDS Adaptation

Click to expand...

How would I go about changing the idle rpm on a mk5 BKD boss, I can't unlock the adaptation as I think I need SA/SKC or 7 digit pin? Thanks in advance

Try 12233 as security code.

Actually could be that the Idle speed adaptation was only up till Golf mk IV and not in MK5 anymore either. Maybe RT people can help with the proper security access on your engine? Don't think it's the SKC what is needed here.