Need help for install Tiguan 3d counter on Caddy bifuel

Hi to all dears,
I'm making conversion Tiguan counter color 3d 5N0920883D petrol for my friend's Caddy

He has MFA B/W now.

Well I have all these eeproms dumps:

- 5N0920883D (counter using for conversion sw705/hw03)
- 2K5920886F (original eeprom dump from year 2019 Caddy 3d color bifuel sw2030/hw02)
- 2K5920876M (counter now installed from factory Caddy year 2019 bifuel sw2030/hw03)


My question:
is possible write complete Caddy 3D eeprom on That tiguan counter?

Thanks to all for help

It is certainly not possible with VCDS.

Maybe you should ask this in a forum for the tool you intend to use to do that?

-Uwe-

Easy!
Did it on my diesel Caddy last autumn.

But You need to modify parking Brake schematic for manual not EPB.

Uwe said:

It is certainly not possible with VCDS.

Maybe you should ask this in a forum for the tool you intend to use to do that?

-Uwe-

Click to expand...

Yes UWE, sure!
I use VVDI2 for this
I asked to forum about, here in Europe there is xhorse official forum, but polish webmaster doesn't like myself (i don't know reasons) and not approved my registration.....

golfi_vend said:

Easy!
Did it on my diesel Caddy last autumn.

But You need to modify parking Brake schematic for manual not EPB.

Click to expand...

Did you write flash too?
Because I did try to write eeprom dump but I have fault "steurgerat defekt" this is eeprom dump not compatible with flash (sw)
Could be need flashing tiguan counter flash from 0705 sw to 2030.....
i did try to create bifuel dump from tiguan petrol dump, but after transfer immoblock, on the bench counter not read transponder chip.... I think there are different addresses on flash.....