I have never successfully fully downoad DS ASAM data.
After using the HEX-NET to do an Auto Scan, when selecting Central Electronics, it will say No ASAM Data found locally. It will check server for updates. Most of the time it will not start downloading. or it would start downloading and never gets completed. In some instances , it would even say no ASAM data found in server. Module maybe not be currently supported or ReDir fail.
If I then connect HEX-NET to PC, using the VCIConfig to check for updates, it will successfully download some DS data.. the largest file size i've seen is 357kb. If i then connect the HEX-NET to the vehicle and use my vcds mobile (or browser), connecting to central electronics would result in no ASAM data found again. This goes on and on. I'm not entirely sure what data is downloaded or not. Or which module would require ASAM data. I've tried ABS module. Engine, and a few others. I wasnt prompted for no ASAM data.
If I would to connect the HEX-NET via USB again and use VCIConfig to check for updates, it will say update found. The entire thing just keeps going in a loop.
Is the server missing some DS data for HEX-NET?
IF i would to use it with USB connection and VCDS application, it works fine.
The network test pings are quite high too. averaging highs 200ms. even on solid wired internet connection.
Please someone advise. Thank you!
Best regards
Sam
After using the HEX-NET to do an Auto Scan, when selecting Central Electronics, it will say No ASAM Data found locally. It will check server for updates. Most of the time it will not start downloading. or it would start downloading and never gets completed. In some instances , it would even say no ASAM data found in server. Module maybe not be currently supported or ReDir fail.
If I then connect HEX-NET to PC, using the VCIConfig to check for updates, it will successfully download some DS data.. the largest file size i've seen is 357kb. If i then connect the HEX-NET to the vehicle and use my vcds mobile (or browser), connecting to central electronics would result in no ASAM data found again. This goes on and on. I'm not entirely sure what data is downloaded or not. Or which module would require ASAM data. I've tried ABS module. Engine, and a few others. I wasnt prompted for no ASAM data.
If I would to connect the HEX-NET via USB again and use VCIConfig to check for updates, it will say update found. The entire thing just keeps going in a loop.
Is the server missing some DS data for HEX-NET?
IF i would to use it with USB connection and VCDS application, it works fine.
The network test pings are quite high too. averaging highs 200ms. even on solid wired internet connection.
Please someone advise. Thank you!
Best regards
Sam