Isolated Instrument Fault Code

Based on the VCDS scan below, can anyone assist in locating the fault and how to fix it?

Thanks

Address 17: Instruments (J285) Labels:| 5G0-920-XXX-17.clb-SRI3
Part No SW: 5G0 920 860 HW: 5G0 920 860
Component: KOMBI 235 0555
Coding: 27A401002380000800086A00040000
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_DashBoardVDDMQBAB 008026
ROD: EV_DashBoardVDDMQBAB_008_VW37.rod
VCID: 6597B230B5EAF16F0D0-8031

1 Fault Found:
10485826 - Internal Control Module Memory Check Sum Error
B2000 41 [009] - General checksum failure
[Steuergerät defekt (CRC Check ROM)]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 92245 km
Date: 2017.08.18
Time: 13:33:00

Steuergerät defekt = Control Module Defective.

Has anyone been into this Instrument Cluster with sketchy Immo or "mileage correction" tools?

-Uwe-

Hi Uwe, Not that I know of. The fault just appeared one day and Ive only ever used VCDS.

Is there a way to flash it?

Uwe said:

Steuergerät defekt = Control Module Defective.

Has anyone been into this Instrument Cluster with sketchy Immo or "mileage correction" tools?

-Uwe-

Click to expand...

Hi UWE... or anyone else with any further info,

If I replace the 5G0 920 860 instrument dash, does the mileage come from either the control unit or power unit: 5Q0937084M and 04E907309A... or is it stored and generated in the instrument dash?

My car is a VW Golf Mk7 2013.

Thanks

Mileage is stored in the instrument cluster and if you're installing a used one, cannot be changed with VCDS (or the dealers' tool for that matter).

-Uwe-