2009 VW Crafter DPF Regen Issue

Status
Not open for further replies.
   #1  
C

Chr15

Verified VCDS User
Verified
Joined
Dec 8, 2014
Messages
24
Reaction score
1
Location
UK
VCDS Serial number
C?ID=207693
Hi All

Could anyone assist with this one.
Ive got a 2009 Vw Crafter that im unable to carry out dpf regeneration, the adaptation and basic settings options show no documentation available and also coding II and securtiy access doesn't give the assist bubbles to help activate regeneration.

Ive checked the ross tech wiki and thats doesnt have informatrion needed either.

Vehicle has recently had a replacement dpf, not by myself and i dont believe the values were reset so already showing blocked. No other faults with vehicle to of caused it to block up so early that im aware of.

Thanks Chris

Code: 
Tuesday,16,May,2017,12:09:34:26527
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 17.1.3.0 (x64)
Data version: 20170220 DS267.3
www.Ross-Tech.com


VIN: WV1ZZZ2FZA7001509   License Plate: PK59 RNF



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 2F (2F - VW Crafter (LT3 / 2006 >))
Scan: 01 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E 9F A0 A1 A2 A3
          B0 B1 B2 B3 B4 B5 B6 C1
 
VIN: WV1ZZZ2FZA7001509   
-------------------------------------------------------------------------------
Address 01: Engine (CEB)       Labels: Redir Fail!
   Part No SW: 076 906 022 N    HW: 076 906 022 G
   Component: R5 2,5L EDC A020SG  7731  
   Revision: 24H30---    Serial number: VWXDZ0I1012280
   Coding: 0003032
   Shop #: WSC 00011 888 06946
   VCID: 1E33DA5ECAD04AB1FB-5122

1 Fault Found:
009315 - Diesel Particle Filter 
               P2463 - 000 - Excessive Soot Accumulation - MIL ON
             Freeze Frame:
                    Fault Status: 11100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 0

             Freeze Frame:
                    RPM: 735 /min
                    Speed: 0.0 km/h
                    Pressure: 82 mbar
                    Hex Value: 0xFF00
                    Temperature: 108.0°C
                    (no units): 51.0
                    Mileage: 0 km

Readiness: 0 2 0 0 1 

-------------------------------------------------------------------------------
Address 91: LT3 Engine        Labels: Redir Fail!
   Part No SW: 076 906 022 N    HW: 076 906 022 G
   Component: R5 2,5L EDC A020SG  7731  
   Revision: 24H30---    Serial number: VWXDZ0I1012280
   Coding: 0003032
   Shop #: WSC 00011 888 06946
   VCID: 1E33DA5EC9D04AB1FB-804A

1 Fault Found:
009315 - Diesel Particle Filter 
               P2463 - 000 - Excessive Soot Accumulation - MIL ON
             Freeze Frame:
                    Fault Status: 11100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 0

             Freeze Frame:
                    RPM: 735 /min
                    Speed: 0.0 km/h
                    Pressure: 82 mbar
                    Hex Value: 0xFF00
                    Temperature: 108.0°C
                    (no units): 51.0
                    Mileage: 0 km


-------------------------------------------------------------------------------
Address 93: LT3 Immo        Labels: 2E0-905-865-93.clb
   Part No SW: 2E0 905 865 AD    HW: 906 545 580 8
   Component: IMMO          0805  0815  
   Revision: 00805000    Serial number: VWXDZ0I1012280
   Shop #: WSC 00000 000 00000
   VCID: 6DD1CD9274F6612932-8038

No fault code found.

-------------------------------------------------------------------------------
Address 94: LT3 Airbag 
   Part No HW: 9064461442
   Shop #: WSC 00118 555 00000
   ASAM Dataset: 3 3332
   ROD: CRFT_AB_3_3332.rod (*)
   VCID: 55A185723466C9E9EA-8000

No fault code found.

-------------------------------------------------------------------------------
Address 95: LT3 ESP 
   Part No SW: 9064482453    HW: 0004460153
   Shop #: WSC 00118 555 00000
   ASAM Dataset: 3 4101
   ROD: CRFT_ESP_3_4101.rod (*)
   VCID: 0D11AD12DC36C12992-8058

No fault code found.

-------------------------------------------------------------------------------
Address 96: LT3 Instruments 
   Part No SW: 9064482221    HW: 0034468021
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 32 777
   ROD: CRFT_KOMBI_32_777.rod
   VCID: 0603923EB940B271D3-8052

No fault code found.

-------------------------------------------------------------------------------
Address 99: LT3 Ign. Switch 
   Part No HW: 9065455808
   Shop #: WSC 00118 555 00000
   ASAM Dataset: 67 257
   ROD: CRFT_EZS_67_257.rod (*)
   VCID: 55A185723466C9E9EA-8000

No fault code found.

-------------------------------------------------------------------------------
Address 9A: LT3 Central Locks        Labels: 2E0-905-865-9A.clb
   Part No SW: 2E0 905 865 AD    HW: 906 545 580 8
   Component: HF-FFB        0805  0815  
   Revision: 00805000    Serial number: 12345678901234
   Shop #: WSC 00000 000 00000
   VCID: 6DD1CD9274F6612932-8038

No fault code found.

-------------------------------------------------------------------------------
Address 9B: LT3 Driver Door 
   Part No HW: 9068204126
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 33 773
   ROD: CRFT_FTUHR_33_773.rod (*)
   VCID: 55A185723466C9E9EA-8000

No fault code found.

-------------------------------------------------------------------------------
Address B0: LT3 Roof Display 
   Part No SW: 9064480323    HW: 9068203601
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 21 3
   ROD: CRFT_DBE_21_3.rod (*)
   VCID: 071D9F3ABE4AAB79A8-8052

No fault code found.

-------------------------------------------------------------------------------
Address B1: LT3 Upper Console 
   Part No HW: 9065453907
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 67 3
   ROD: CRFT1_OBF_67_3.rod (*)
   VCID: 55A185723466C9E9EA-8000

No fault code found.

-------------------------------------------------------------------------------
Address B4: LT3 Central Elec. 
   Part No SW: 9064420700    HW: 9065453601
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 33 260
   ROD: CRFT_EZE_33_260.rod (*)
   VCID: 55A185723466C9E9EA-8000

No fault code found.

-------------------------------------------------------------------------------
Address B6: LT3 Steering Wheel 
   Part No SW: 9065402345    HW: 9065402345
   Shop #: WSC 00000 000 00000
   ASAM Dataset: 72 257
   ROD: CRFT_SML_72_257.rod (*)
   VCID: 0603923EB940B271D3-8052

No fault code found.

End-------------------------(Elapsed Time: 03:42)--------------------------
 
   #2  
B

billywhizz

Verified VCDS User
Verified
Joined
Jun 28, 2016
Messages
48
Reaction score
23
Location
UK
VCDS Serial number
C?ID=278038
can you check and publish the readings for the ash/oil also ,soot measured and soot calculated, once we can see those then we can determine if its possible too do a regen.
 
   #3  
Uwe

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
49,692
Reaction score
34,014
Location
USA
VCDS Serial number
HC100001
What do you have in MVBs 107 and 108?

Also take a look at Adaptation Channel 016, particularly the associated measuring values. I think that's where the ash volume is reset, by storing a 1, which has to be done with the engine running at least 1300 RPM.

-Uwe-
 
   #4  
C

Chr15

Verified VCDS User
Verified
Joined
Dec 8, 2014
Messages
24
Reaction score
1
Location
UK
VCDS Serial number
C?ID=207693
Code: 
Tuesday,16,May,2017,18:18:15:26527
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 17.4.2.3 (x64)
Data version: 20170505 DS270.4
www.Ross-Tech.com


VIN:    License Plate: PK59 RNF



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


                Address 91: LT3 Engine  (076 906 022 N)

18:17:50 Group 107
  50.4    
  45.6    
  27.6    
       

18:17:50 Group 108
  0 ml  milliliters 
  0.0    
  34.8
 
  • Like
Reactions: Uwe
   #5  
C

Chr15

Verified VCDS User
Verified
Joined
Dec 8, 2014
Messages
24
Reaction score
1
Location
UK
VCDS Serial number
C?ID=207693
Uwe said:
What do you have in MVBs 107 and 108?

Also take a look at Adaptation Channel 016, particularly the associated measuring values. I think that's where the ash volume is reset, by storing a 1, which has to be done with the engine running at least 1300 RPM.

-Uwe-
Click to expand...

Have updated with MVB's 107 + 108.

Also checked channel 16 and yes it looks to those associated MVB's but didnt want to just reset yet until was more confident as there is no text or info displayed just the numerical values.
Thanks
 
   #6  
C

Chr15

Verified VCDS User
Verified
Joined
Dec 8, 2014
Messages
24
Reaction score
1
Location
UK
VCDS Serial number
C?ID=207693
Code: 
Tuesday,16,May,2017,18:25:48:26527
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 17.4.2.3 (x64)
Data version: 20170505 DS270.4
www.Ross-Tech.com




Long Adaptation Channel 016:
Stored value 0
  0 ml  milliliters 
  0.0    
  22.8    
  0 km  Mileage
 
   #7  
L

Lightboy

Verified VCDS User
Verified
Joined
Dec 17, 2019
Messages
16
Reaction score
1
Location
UK
VCDS Serial number
C?ID=382313
Chr15 said:
Have updated with MVB's 107 + 108.

Also checked channel 16 and yes it looks to those associated MVB's but didnt want to just reset yet until was more confident as there is no text or info displayed just the numerical values.
Thanks
Click to expand...

Hi Chris15

Wondering if you or anyone cpould help me with MVB 107, 108 and 016 as you suggested above .

This is what i got.

15:19:23 Group 107
48.0
45.6
26.4


15:19:23 Group 108
78 ml milliliters
34.8
40.8


15:19:23 Group 016
20.5 % Lambda
00000000 Bin. Bits
0.0 (no units)
14.21 V Voltage

Does this suggest i have a blocked DPF ?
 
Status
Not open for further replies.
Back
Top