Shaun

I believe the interface does not support a key length of 64 is why that is not being accepted. Do you have control of this wifi...

This sounds like it is not detecting that the ignition is on, are you sure the ignition is on and the interface is seated all the way...

What dataset version does VCIConfig show, is it 00000046? There could be a problem with the SD card in the interface, but you should...

If entering the measuring block manually with the existing interface does not work, then there is an underlying problem perhaps with the...

It sounds like maybe this isn't compatible with your tune. If you want to make a debug log for one of the blocks that's not working...

So what happens when you type 14 in the field and click submit?

If I understand correctly, you are wanting to manually view a block by group number in a non-UDS controller? You can do this by typing...

FWIW the English VCIConfig 2.301 build was last done on 12/6/22. If the files were touched since then they may have been re-signed or...

Do you have DELL or Alienware mouse or touchpad software installed? If so, try closing that software either from the taskbar or...

Have you read through this thread? There are a number of tips on how to resolve this issue.

You could try mounting the card on windows and running a disk clean, that might be able to fix it. If the card is readable but just...

If you are trying to make this log through VCDS-Mobile, then the debug level would be 001f. See if that makes the log.

It indicates on certain error conditions of the interface/vehicle, such as alerting for a stuck K-Line. It is more used on the HEX-NET...

Sure, if this is with VCDS 1028 debugs are a good start. Can it talk to the other modules individually?