Jef

Seems to be a rather odd and rare code. Doing some poking around and I find this thread. Another TDI, but I think even more...

They are "Intermittent" codes, I'd not be worried about it as this point. Clear them out and check again a few weeks later. If...

once the trailer is plugged in the dashboard goes through a few pop ups which seem to be standard messages: 1. maneuver braking...

thanks the engine code accepted the Byte 5 from about. here is the latest scan: Tuesday,07,May,2024,19:43:30:44010 VCDS -- Windows...

And what is the back story? What modules have been swapped out and why?

Immediately after the accepted coding, without turning off the ignition, start the engine and go to the basic setting of the G85, and...

If you have a past Auto-Scan of the original ABS module, then by all means please post it. From the first screen of VCDS, click on the...

ECM uses the "W" line, not the "K" line to talk to a scan tool. This is just means the path the ECM uses to talk to a scan tool goes...

Address 01: Engine, soft coding change Byte 5, Bit 4 enable Byte 6, Bit 4 enable 012A00122464012FB4000000000000000000000000000000...

Is this what you are looking for? Engine specification DR2 5-cylinder SI engine 2.5 l/228 kW (20V)(R-5) TFSI, homogeneousbase engine...

That is a rather odd Auto-Scan... Gateway list status and then actual auto-scan report, things dont' agree. The Gateway list shows a...

Thank you for the update. If possible, can we get a follow up Auto-Scan?

Good catch! The seller sent me the wrong one, got the correct one and everything is working thank you!

Thank you for posting the Auto-Scan! :thumbs: Looking at the wiring diagram, the alarm horn (H12) and Anti-theft alarm sensor (G578)...

I can't confirm it, but your hypothesis strikes me as entirely plausible. Well, your ECU coding is currently 0000071, which...