(Need Help) 2009 A4 2.0 will not start...autoscan posted

Status
Not open for further replies.
   #21  

Welder75

Verified VCDS User
Verified
Joined
Dec 19, 2015
Messages
292
Reaction score
296
Location
Canada
VCDS Serial number
C?ID=261654
What is a WD? Sorry I'm not familiar yet

any text in green hold mouse cursor over , the forum is coded to recognize short form text of commonly use phrases and code it so u can hold cursor over it and a box shows up for info.

to test ignition switch you will need a WD for your specific car, A repair manual( RTFB ) for procedures. and a knowledge how to use DVOM.

with ignition key on does all your lights work? headlamps, interior, signal markers, driving lights, dash cluster, radio?
 
Last edited:
  • Like
Reactions: Uwe
   #23  

yodizzle

Verified VCDS User
Verified
Joined
Nov 4, 2015
Messages
10
Reaction score
0
Location
USA
VCDS Serial number
C?ID=241097
yes, every light works inside and out
 
   #24  

yodizzle

Verified VCDS User
Verified
Joined
Nov 4, 2015
Messages
10
Reaction score
0
Location
USA
VCDS Serial number
C?ID=241097
Sorry for late reply guys, motor was toast no compression at all, not a single bit. Was so bad that I though my gauge was broken. A McDonald's straw had more compression!!!! Sorry for wasting peoples time guys. I was told a compression test had been done when it actually wasn't. Looking for a good used motor now, anyone???
 
Status
Not open for further replies.
Back
Top