RNS long coding - what it is chenging exactly

[p.kapelanczyk]

Hy Guys

I am new here and I am owner of VW T5.1 California.
I added amplifier right now which is connected to RNS 510 by HI signal.

RNS coding allow change byte 1 bit 0-7 which is assign to selection between 00 - no module, 01 - vw sounf system, 05 - dynaaudio. What exactly this settings are changing? Is there any conversion between Hi and LOW signal between this settings?
Or I can live it as it is with new amplifier.

 

[PetrolDave]

Please post a full unedited VCDS Auto-Scan (using the English version of VCDS) so we can see how your T5.1 is equipped.

 

[p.kapelanczyk]

But I would like to know only what this coding is changing in the seaker signal. There is no need for atoscan

 

[Viking]

But we need an autoscan to know how to answer your questions. Please...

 

[Uwe]

-Uwe-

 

[p.kapelanczyk]

Pelny log

Removed.  Data from a clone/pirate VCDS system is not acceptable here.

 

[Uwe]

Getting help in this forum requires the use of a legitimate VCDS system.

They are available directly from us:
https://store.ross-tech.com/shop/cat/VCDS

... Or from any of our authorized resellers:
http://www.ross-tech.com/distributors.php#pl

Let us know if/when you get one and we'll adjust your forum status.

-Uwe-