- Joined
- Nov 10, 2014
- Messages
- 1,527
- Reaction score
- 2,270
- Location
- New Zealand
- VCDS Serial number
- C?ID=230482
Off Topic - not VCDS related at all, but I know some of you guys are as weird as meeeee! so I've posted this in general repair :
Uwe: feel free to move, REmove etc, if you see fit
Does anybody have the hex address map for the EEPROM binary (.bin) file from a MK5 instrument cluster of any kind? .OLS or .KP, map pack, etc?
I'm specifically looking for the tables to adjust the speedo reading and the built in error; and the Distance impulse if required. My actual cluster is a 1K6 920 862 F
I have slightly larger tyres than stock on the R32ran and have adjusted the impulse counter to the closest figure, but would like to make it accurate. Then I'd like to alter the speedometer "calibration" to a consistant and suitable "error" margin.
Any help greatly appreciated... I got a speed camera ticket in the mail today... doing 85km/h in a 80km/h zone .... on Christmas Morning
Uwe: feel free to move, REmove etc, if you see fit
Does anybody have the hex address map for the EEPROM binary (.bin) file from a MK5 instrument cluster of any kind? .OLS or .KP, map pack, etc?
I'm specifically looking for the tables to adjust the speedo reading and the built in error; and the Distance impulse if required. My actual cluster is a 1K6 920 862 F
I have slightly larger tyres than stock on the R32ran and have adjusted the impulse counter to the closest figure, but would like to make it accurate. Then I'd like to alter the speedometer "calibration" to a consistant and suitable "error" margin.
Any help greatly appreciated... I got a speed camera ticket in the mail today... doing 85km/h in a 80km/h zone .... on Christmas Morning