Hi guys,
I am new to this forum , it’s my first post.
I bought a HeX net unlimited vin and it’s on the way.
I have a 3 door 2016 GTI clubsport.
It has ACC (front radar) , 8” discover pro with dynaudio and a lot of other options.
Unfortunately because it’s 3 door , there was no option for kessy and I want to retrofit it.
So far I bought :
Kessy module (5Q0959435B)
ELV (5Q0905861A)
Push start button (51G959839)
1 IMMO coil reader (5K0953254A)
Virgin kessy set (5G0800375B)
Contain 2 kessy keys (5G0959753BC) , 1 door cylinder and 1 glove box cylinder.
2 mk7 door handles with kessy
1 antena - center console (5K0962132B),
1 antena - back seats (5K0962132A)
1 antena -rear bumper (5Q0962131)
Do I need a new cluster?? Or anything else ?
Considering that my cluster and gateway are high line ones (you will help me once I do the auto scan before touching the car)
I bought full Kessy wiring harness for the front 2 doors , but I am still not sure if it’s for the 5 door car or the 3 door ( maybe the length of the wires will be different) also my car contains dynaudio system , I don’t know if the wires will match my setup.
For the rest of the harnesses I didn’t find anything in e-bay other than a set of full kessy wires for the Passat cc B7 , so I bought it , I think that system has the Same antennas , ELV , I am not sure about about the kessy module or the push start button !
I logged in Erwin for 1 day and pulled out all the pdf for the car (wiring diagram and a lot more)
Let consider I wired everything in the correct manner.
What I have to do using the HEX -net since its my first time using VCDS and also my vw dealer is not cooperative at all, so I want everything to be coded and if I have to visit the dealer will be only for programming the keys .
My question is if I did the correct wiring and coding and befor going to the dealer, my system should work with my old key if grap the key next to the coil reader and pushed the start button ,right??
Another question , if I did the auto scan after installation, can help me with coding and how ? Is there any reference ???
Is there any component protection related to kessy system ?? (Some part are used)
Please tell me if this can be done , I love my clubsport and I don’t want to miss up with it , also I really want kessy as my previous car was having this feature and I used to it.
Appreciate your help.
I am new to this forum , it’s my first post.
I bought a HeX net unlimited vin and it’s on the way.
I have a 3 door 2016 GTI clubsport.
It has ACC (front radar) , 8” discover pro with dynaudio and a lot of other options.
Unfortunately because it’s 3 door , there was no option for kessy and I want to retrofit it.
So far I bought :
Kessy module (5Q0959435B)
ELV (5Q0905861A)
Push start button (51G959839)
1 IMMO coil reader (5K0953254A)
Virgin kessy set (5G0800375B)
Contain 2 kessy keys (5G0959753BC) , 1 door cylinder and 1 glove box cylinder.
2 mk7 door handles with kessy
1 antena - center console (5K0962132B),
1 antena - back seats (5K0962132A)
1 antena -rear bumper (5Q0962131)
Do I need a new cluster?? Or anything else ?
Considering that my cluster and gateway are high line ones (you will help me once I do the auto scan before touching the car)
I bought full Kessy wiring harness for the front 2 doors , but I am still not sure if it’s for the 5 door car or the 3 door ( maybe the length of the wires will be different) also my car contains dynaudio system , I don’t know if the wires will match my setup.
For the rest of the harnesses I didn’t find anything in e-bay other than a set of full kessy wires for the Passat cc B7 , so I bought it , I think that system has the Same antennas , ELV , I am not sure about about the kessy module or the push start button !
I logged in Erwin for 1 day and pulled out all the pdf for the car (wiring diagram and a lot more)
Let consider I wired everything in the correct manner.
What I have to do using the HEX -net since its my first time using VCDS and also my vw dealer is not cooperative at all, so I want everything to be coded and if I have to visit the dealer will be only for programming the keys .
My question is if I did the correct wiring and coding and befor going to the dealer, my system should work with my old key if grap the key next to the coil reader and pushed the start button ,right??
Another question , if I did the auto scan after installation, can help me with coding and how ? Is there any reference ???
Is there any component protection related to kessy system ?? (Some part are used)
Please tell me if this can be done , I love my clubsport and I don’t want to miss up with it , also I really want kessy as my previous car was having this feature and I used to it.
Appreciate your help.