hi guys, i have an issue with a passat. it came in as a non starter with various no comms faults. i traced the fault to a fried steering column control module causing fuse 16 in the engine bay to blow. ive replaced the module with a used part with exactly the same part number but i need some help coding it. ill include autoscans with the old part fitted and the new part fitted.thanks a lot
2005 passat b6
- Thread starter tomb711
- Start date
- Status
new part fitted
Code:
Removed. Data from a clone/pirate copy of VCDS is not acceptable here
Last edited by a moderator:
old part fitted
Code:
Removed. Data from a clone/pirate copy of VCDS is not acceptable here
Last edited by a moderator:
im assuming the key fault if due to incorrect vin or no coding. the airbag and radio faults are because thryre not fitted
Getting help in this forum requires the use of a legitimate VCDS system.
They are available directly from us:
https://store.ross-tech.com/shop/cat/VCDS
... Or from any of our authorized resellers:
http://www.ross-tech.com/distributors.php#uk
-Uwe-
- Status