hi guys, Ive recently fitted a new steering angle sensor to a Audi A4 2010. i carried out the basic setting for the component and all is good an that side of things but the controls on the steering wheel dont work i the fault code says.....Wednesday,04,February,2015,12:54:15:23183
VCDS Version: Release 14.10.1
Address 16: Steering wheel Labels: 8K0-953-568.clb
Control Module Part Number: 8K0 953 568 M HW: 8K0 953 568 M
Component and/or Version: Lenks.Modul H04 0005
Software Coding: 000000
Work Shop Code: WSC 00000 000 00000
VCID: 448CAC3AC7C150010A8-8011
1 Fault Found:
01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 3
Fault Frequency: 1
Reset counter: 139
Mileage: 106106 km
Time Indication: 0
Date: 2009.06.26
Time: 00:17:37
I wonder if anyone on here can tell me how to code the new unit in please
Cheers
Gez
VCDS Version: Release 14.10.1
Address 16: Steering wheel Labels: 8K0-953-568.clb
Control Module Part Number: 8K0 953 568 M HW: 8K0 953 568 M
Component and/or Version: Lenks.Modul H04 0005
Software Coding: 000000
Work Shop Code: WSC 00000 000 00000
VCID: 448CAC3AC7C150010A8-8011
1 Fault Found:
01044 - Control Module Incorrectly Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 3
Fault Frequency: 1
Reset counter: 139
Mileage: 106106 km
Time Indication: 0
Date: 2009.06.26
Time: 00:17:37
I wonder if anyone on here can tell me how to code the new unit in please
Cheers
Gez