Good day.
Last June I changed my CLP because was leaking. I replaced it by repaired one. After replaced it did not work due coding and WS were different. I changed code and WS number and worked perfectly. A month later after drive and turned off ignition remote controller did not work. I checked fault memory and get 00095 - key 1: Adaptation Limit Surpassed, so erased fault, matched key and worked again. One month later (approx.) again same issue. This time changed remote control batteries, erased remote controllers, matched again and worked. Again, a month later same issue was present, but after test all possible factors found that it solved only turned ignition ON and OFF. .
On a month time frame, same issue, same solution, but not fault was present on module 35. Was not a big deal if only need turned ON and OFF ignition to solve problem every month. But one month ago start to fails every week and that's make me upset.
This was old CLP configuration:
Address 35: Centr. Locks Labels:. 8D0-862-257.clb
Part No: 8L0 862 257 N
Component: CV-Pump, Alarm, RC D16
Coding: 13932
Shop #: WSC 18500
VCID: 408F411540E6584FD1-4EEA
1 Fault Found:
01367 - Central Locking Pump Run Time Exceeded (Likely Leak)
35-00 - -
This was new CLP with original configuration:
Address 35: Centr. Locks Labels:. 8D0-862-257.clb
Part No: 8L0 862 257 N
Component: CV-Pump D10
Coding: 16140
Shop #: WSC 06335
VCID: 408F411540E6584FD1-4EEA
No fault code found.
This is new CLP with modified configuration on last scan:
I will appreciate any comments to solve this.
Thanks
Last June I changed my CLP because was leaking. I replaced it by repaired one. After replaced it did not work due coding and WS were different. I changed code and WS number and worked perfectly. A month later after drive and turned off ignition remote controller did not work. I checked fault memory and get 00095 - key 1: Adaptation Limit Surpassed, so erased fault, matched key and worked again. One month later (approx.) again same issue. This time changed remote control batteries, erased remote controllers, matched again and worked. Again, a month later same issue was present, but after test all possible factors found that it solved only turned ignition ON and OFF. .
On a month time frame, same issue, same solution, but not fault was present on module 35. Was not a big deal if only need turned ON and OFF ignition to solve problem every month. But one month ago start to fails every week and that's make me upset.
This was old CLP configuration:
Address 35: Centr. Locks Labels:. 8D0-862-257.clb
Part No: 8L0 862 257 N
Component: CV-Pump, Alarm, RC D16
Coding: 13932
Shop #: WSC 18500
VCID: 408F411540E6584FD1-4EEA
1 Fault Found:
01367 - Central Locking Pump Run Time Exceeded (Likely Leak)
35-00 - -
This was new CLP with original configuration:
Address 35: Centr. Locks Labels:. 8D0-862-257.clb
Part No: 8L0 862 257 N
Component: CV-Pump D10
Coding: 16140
Shop #: WSC 06335
VCID: 408F411540E6584FD1-4EEA
No fault code found.
This is new CLP with modified configuration on last scan:
Code:
Saturday,01,February,2020,17:16:17:26011
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.6.2.0 (x64)
Data version: 20190930 DS308.0
www.Ross-Tech.com
VIN: 93UMC28L014003866 License Plate: A3
Mileage: 268660km-166937mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 8L (8L - Audi A3/S3 (1997 > 2005))
Scan: 01 02 03 08 15 16 17 22 35 37 45 55 56 57 75 76
VIN: 93UMC28L014003866 Mileage: 268660km-166937miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 06A-906-032-AJQ.clb
Part No: 06A 906 032 FB
Component: 1.8L R4/5VT 0003
Coding: 04500
Shop #: WSC 66565
VCID: 63C5AE99F1302357DA-5140
93UMC28L014003866 AUZ7Z0Y1655196
No fault code found.
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1C0-907-37x-ASR.lbl
Part No: 1C0 907 379 D
Component: ASR FRONT MK60 0103
Coding: 0021505
Shop #: WSC 00000 785 00200
VCID: 2B5506B98960AB1722-5140
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: Redir Fail!
Part No: 8L0 820 043 H
Component: A3 KLIMAAUTOMAT 0101
Coding: 00040
Shop #: WSC 00000
VCID: 2D5108A1E774A5273C-2598
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 8L0-959-655-AI8.lbl
Part No: 8L0 959 655 L
Component: Airbag Front+Seite 7008
Coding: 00104
Shop #: WSC 18500
VCID: 479D5A0965C86F7726-515E
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 8L0-920-xxx-17.lbl
Part No: 8L0 920 931 MX
Component: KOMBI+WEGFAHRS. VDO D14
Coding: 00544
Shop #: WSC 00000
VCID: 1129B4515B0CE1C738-5140
93UMC28L014003866 AUZ7Z0Y1655196
No fault code found.
-------------------------------------------------------------------------------
Address 35: Centr. Locks Labels:. 8D0-862-257.clb
Part No: 8L0 862 257 N
Component: CV-Pump D10
Coding: 13932
Shop #: WSC 18500
VCID: 408F411540E6584FE7-4EEA
No fault code found.
-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 4B0-951-173.lbl
Part No: 4B0 951 173
Component: Innenraumueberw. D03
Coding: 00001
Shop #: WSC 00000
VCID: 60CFA195E026384FC7-4B32
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio Labels: 8D0-035-1xx-56.lbl
Part No: 8L0 035 186 B
Component: Radio D05
Coding: 00017
Shop #: WSC 00000
VCID: 2D5108A1E774A5273C-4B1A
Note: Excessive Comm Errors
End-------------------------(Elapsed Time: 04:01)--------------------------
I will appreciate any comments to solve this.
Thanks