- Joined
- Jul 17, 2019
- Messages
- 15
- Reaction score
- 19
- Location
- Trondheim, Norway
- VCDS Serial number
- C?ID=369124
Hi. My name is Rizzio, and i'm from North europe
I am going to try to guide you trough the process of installing the Vze system in an Audi A6 C7 facelift.
I'm going to take my car as basis for the installation, but i do have som knowledge with other spec/pre facelift cars.
My car does not come with matrix led lights, no side assist system, or any other equipment that uses the front camera, so this is a full retrofit.
My car does come with the 7UG Mib2 High Mmi (4G)
First, some usefull websites, so you can check your PR codes, and what parts your car needs regarding upgrades
PR codes checker, Partscatalog, Wirediagrams etc
Part 1: Hardware/installation
If you have Acc, you might just need softwarecoding to install the vze (might need the vze cable from 85)
Laneassist do have all needed hardware, just coding needed
Matrix led lights have the camera, so wiring and imageprocessor needed
So scan your car and compare the parts to my scan regarding partnumbers.
My partslist include, A new front windscreen, front camera, cameracover, image processor, Sensor Electronic module, (steering wheel stalk (i wanted the lane assist as well), image processor bracket, cables, tools, tesa tape!!
I needed:
A new front Windscreen: 4G0 845 099 G NVB
Camera Control Module J852 (VCDS ECU 85) Camera: 4H0 907 217 F
Image Processing Control Module J851 (VCDS ECU 8E) Image processor: 4G0 907 107 H
Sensor Electronic module J849 (VCDS ECU 3B) Not compatible: Do not use 4G0 907 637 H!, upgrade to Compatible unit: 4G0 907 637 K
Steering wheel unit J527 was 4H0 953 568 K, upgraded to 4H0 953 568 H (for the lane assist)
Cameracover: 4G0 907 299 AB 4PK and 4G0 907 225 C 4PK
Image processor bracket: 8K0907731
Cables: i used Lane assist anc traffic sign recognition
if you want lane assist:
Without ACC: Steering Column Lever Assembly: 4G0 953 502 S (this one have avant rear viper, cruicecontroll and lane assist)
With ACC: Steering Column Lever Assembly: 4G8 953 502 S (this one have avant rear viper, acc and lane assist)
Tesa tape so you avoid rattling (get more than one )
Tools: Vag Com, Vag Can Pro
I would install the parts needed in this order if your going to do this retrofit. Check what equipment your car, and whats missing.
1:
Get the sensor electronic module first, and upgrade this part if your unit ends with suffix H. Its located under the armrest
When installed, enter adress 3B and choose basic settings, Calibration, press go, and your set.
Sara 3D is now upgraded to handle image signals.
If you skip this part, you will end up with the error "Function Restricted due to Missing Message(s)"
2:
Imageprocessor. Remember to get correct one for your car, facelift version 4G0 907 107 H, its located in the front footwell in front of the passenger seat
The short version is, find the wires from the gateway (pin 7 and 23) that goes to the abs unit, cut the wires, and extend them to the imageprocessor. And pin them correctly (pin 3 and 4, 9 and 10)
If you mess up the wiring (use the *4) from the Gateway J533 via the Imageprocessor J8501 to the abs J104, this happens, happy hunting faultcodes.
My ABS unit 4G0 907 379 Q have the code AJ (No acc)
3:
Get a new windscreen installed by your prefferd workshop. I went with hud/camera/coated/heated (se partscatalog for prefferd windscreen) or ask dealer/workshop.
Install the camera and wires.
Note!! Route the power wires to the Terminal 15 (left side fuse box). Use fuse nr 11 in fuse panel A Black for the Imageprocessor
You could take the easy route and choose to put the wires (both camera and imageprocessor) in the floor going trough the B pilars and under the back seats
Do NOT USE the right side fuse box. This will result in no connection
4:
If you want lane assist, see this article
Part 2: Software/Coding
Notes:
1:
You might need to go to you local workshop for a camera calibration
2:
You might need the Vag can pro tool to update the software in the camera and imageprocessor
There is a lot of different setups from the factory. Supported : Jap, Uk, Rest of the world. with or without trafficsign recognition, and with or without lane assist. The USA have a new updatefile with vag can pro that states it has lane assist, and traffic sign recognition.
If you get the error "outside operational area ", you need to update the software in your imageprocessor
And the fastest way to get the Vze, is to use the vze script in vag can pro
Vagcom:
I ended up wit the following codes, Yours might be different regarding equipment:
Instrumentpanel(17): 03AF12000B550008020000
Mmi unit(5F): 01750201FF0A000013110001000A00132F0006E5F1700100DF
Adaptations:
Lane assist:
ENG122227-ENG117506-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning : Activated
ENG122227-ENG117508-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning_over_threshold_high : Activated
Traffic sign:
ENG122227-ENG117636-Car_Function_Adaptations_Gen2-menu_display_road_sign_identification : Activated
ENG122227-ENG117638-Car_Function_Adaptations_Gen2-menu_display_road_sign_identification_over_threshold_high : Activated
Lane assist:
ENG122229-ENG117740-Car_Function_List_BAP_Gen2-LDW_HCA_0x19: Activated
ENG122229-ENG117741-Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus : Terminal 15
Traffic sign:
ENG122229-ENG117754-Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21 : Activated
ENG122229-ENG117755-Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21_msg_bus : Terminal 15
Headup display(82): AF0000
Camera (85): 71060000
Imageprocessor(8E): 0440A9181111
Adaptations:
IDE04733-Road Sign detection fusion mode : Road sign fusion
IDE04734-Display general maximum speed : Always
IDE04736-Display end of speed limit symbol : 1
IDE04737-Display no passing allowed : Activated
IDE04815-Display valid additional signs : Activated
IDE04816-Prioritize additional wetness signs : Activated
This fault is ok, just take a drive and you should be ok
If all is done correctly, this happens.
Thanks for reading, Regards Rizzio
I am going to try to guide you trough the process of installing the Vze system in an Audi A6 C7 facelift.
I'm going to take my car as basis for the installation, but i do have som knowledge with other spec/pre facelift cars.
My car does not come with matrix led lights, no side assist system, or any other equipment that uses the front camera, so this is a full retrofit.
My car does come with the 7UG Mib2 High Mmi (4G)
First, some usefull websites, so you can check your PR codes, and what parts your car needs regarding upgrades
PR codes checker, Partscatalog, Wirediagrams etc
Part 1: Hardware/installation
If you have Acc, you might just need softwarecoding to install the vze (might need the vze cable from 85)
Laneassist do have all needed hardware, just coding needed
Matrix led lights have the camera, so wiring and imageprocessor needed
So scan your car and compare the parts to my scan regarding partnumbers.
My partslist include, A new front windscreen, front camera, cameracover, image processor, Sensor Electronic module, (steering wheel stalk (i wanted the lane assist as well), image processor bracket, cables, tools, tesa tape!!
I needed:
A new front Windscreen: 4G0 845 099 G NVB
Camera Control Module J852 (VCDS ECU 85) Camera: 4H0 907 217 F
Image Processing Control Module J851 (VCDS ECU 8E) Image processor: 4G0 907 107 H
Sensor Electronic module J849 (VCDS ECU 3B) Not compatible: Do not use 4G0 907 637 H!, upgrade to Compatible unit: 4G0 907 637 K
Steering wheel unit J527 was 4H0 953 568 K, upgraded to 4H0 953 568 H (for the lane assist)
Cameracover: 4G0 907 299 AB 4PK and 4G0 907 225 C 4PK
Image processor bracket: 8K0907731
Cables: i used Lane assist anc traffic sign recognition
if you want lane assist:
Without ACC: Steering Column Lever Assembly: 4G0 953 502 S (this one have avant rear viper, cruicecontroll and lane assist)
With ACC: Steering Column Lever Assembly: 4G8 953 502 S (this one have avant rear viper, acc and lane assist)
Tesa tape so you avoid rattling (get more than one )
Tools: Vag Com, Vag Can Pro
I would install the parts needed in this order if your going to do this retrofit. Check what equipment your car, and whats missing.
1:
Get the sensor electronic module first, and upgrade this part if your unit ends with suffix H. Its located under the armrest
When installed, enter adress 3B and choose basic settings, Calibration, press go, and your set.
Sara 3D is now upgraded to handle image signals.
If you skip this part, you will end up with the error "Function Restricted due to Missing Message(s)"
2:
Imageprocessor. Remember to get correct one for your car, facelift version 4G0 907 107 H, its located in the front footwell in front of the passenger seat
The short version is, find the wires from the gateway (pin 7 and 23) that goes to the abs unit, cut the wires, and extend them to the imageprocessor. And pin them correctly (pin 3 and 4, 9 and 10)
If you mess up the wiring (use the *4) from the Gateway J533 via the Imageprocessor J8501 to the abs J104, this happens, happy hunting faultcodes.
My ABS unit 4G0 907 379 Q have the code AJ (No acc)
3:
Get a new windscreen installed by your prefferd workshop. I went with hud/camera/coated/heated (se partscatalog for prefferd windscreen) or ask dealer/workshop.
Install the camera and wires.
Note!! Route the power wires to the Terminal 15 (left side fuse box). Use fuse nr 11 in fuse panel A Black for the Imageprocessor
You could take the easy route and choose to put the wires (both camera and imageprocessor) in the floor going trough the B pilars and under the back seats
Do NOT USE the right side fuse box. This will result in no connection
4:
If you want lane assist, see this article
Part 2: Software/Coding
Notes:
1:
You might need to go to you local workshop for a camera calibration
2:
You might need the Vag can pro tool to update the software in the camera and imageprocessor
There is a lot of different setups from the factory. Supported : Jap, Uk, Rest of the world. with or without trafficsign recognition, and with or without lane assist. The USA have a new updatefile with vag can pro that states it has lane assist, and traffic sign recognition.
If you get the error "outside operational area ", you need to update the software in your imageprocessor
And the fastest way to get the Vze, is to use the vze script in vag can pro
Vagcom:
I ended up wit the following codes, Yours might be different regarding equipment:
Instrumentpanel(17): 03AF12000B550008020000
Mmi unit(5F): 01750201FF0A000013110001000A00132F0006E5F1700100DF
Adaptations:
Lane assist:
ENG122227-ENG117506-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning : Activated
ENG122227-ENG117508-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning_over_threshold_high : Activated
Traffic sign:
ENG122227-ENG117636-Car_Function_Adaptations_Gen2-menu_display_road_sign_identification : Activated
ENG122227-ENG117638-Car_Function_Adaptations_Gen2-menu_display_road_sign_identification_over_threshold_high : Activated
Lane assist:
ENG122229-ENG117740-Car_Function_List_BAP_Gen2-LDW_HCA_0x19: Activated
ENG122229-ENG117741-Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus : Terminal 15
Traffic sign:
ENG122229-ENG117754-Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21 : Activated
ENG122229-ENG117755-Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21_msg_bus : Terminal 15
Headup display(82): AF0000
Camera (85): 71060000
Imageprocessor(8E): 0440A9181111
Adaptations:
IDE04733-Road Sign detection fusion mode : Road sign fusion
IDE04734-Display general maximum speed : Always
IDE04736-Display end of speed limit symbol : 1
IDE04737-Display no passing allowed : Activated
IDE04815-Display valid additional signs : Activated
IDE04816-Prioritize additional wetness signs : Activated
This fault is ok, just take a drive and you should be ok
If all is done correctly, this happens.
Thanks for reading, Regards Rizzio
Code:
Chassis Type: 4G-AU57 (4G8)
Scan: 01 02 03 05 08 09 15 16 17 19 28 36 3B 42 44 46 52 53 5F 62
69 6C 6D 72 82 85 8E 8F 90 AC
VIN: WAUZZZ4G5FN064973 Mileage: 97885km-60822miles
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: Cannot be reached 0100
19-CAN Gateway -- Status: OK 0000
28-HVAC, Rear -- Status: OK 0000
36-Seat Mem. Drvr -- Status: OK 0000
3B-Sensor Elect. -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
69-Trailer -- Status: OK 0000
6C-Back-up Cam. -- Status: Malfunction 0010
6D-Trunk Elect. -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
82-Heads Up Display -- Status: OK 0000
85-On Board Cam. -- Status: OK 0000
8E-Image Processing -- Status: OK 0000
8F-Pretens. Frt Left -- Status: OK 0000
90-Pretens. Frt Right -- Status: OK 0000
AC-Reductant Control -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CRTE) Labels: Redir Fail!
Part No SW: 4G2 907 311 C HW: 4G2 907 401
Component: 3.0TDI EDC17 X33 0007
Revision: 92X33---
Coding: 12254012053601030000
Shop #: WSC 26214 051 00000
ASAM Dataset: EV_ECM30TDI0114G2907311C 001007
ROD: EV_ECM30TDI0114G2907311C.rod
VCID: 2502E37C24149867CA-8070
No fault code found.
Readiness: 0 0 0 0 1
-------------------------------------------------------------------------------
Address 02: Auto Trans (J217) Labels:| 0B5-927-156.clb
Part No SW: 4G0 927 166 A HW: 0B5 927 156 K
Component: 0B5 30 TDIRdW H03 0009
Revision: --H03---
Coding: 100001
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_TCMDL501021 001021
ROD: EV_TCMDL501021.rod
VCID: 2B16154442F0AE171C-807E
No fault code found.
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels:. 4G0-907-379-V2.clb
Part No SW: 4G0 907 379 Q HW: 4G0 907 379 Q
Component: ESP9 Premium H01 0420
Revision: -------- Serial number: --------------
Coding: 17A69E41E8657982BB00
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_ESP9BOSCHAU57X 003019
ROD: EV_ESP9BOSCHAU57X_003.rod
VCID: 3FCE5114A68822B7A0-806A
No fault code found.
-------------------------------------------------------------------------------
Address 05: Acc/Start Auth. (J393) Labels:. 8K0-907-064-05.clb
Part No SW: 4H0 907 064 FN HW: 4H0 907 064 EN
Component: BCM2 2.0 H36 0560
Revision: 00002001
Coding: 01A9700E000000000000
Shop #: WSC 02391 785 00200
VCID: 7AB8E000F52AC79FD7-802E
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255) Labels:| 4G0-820-043-4Z.clb
Part No SW: 4G0 820 043 CD HW: 4G0 820 043 CD
Component: KLIMA 4 ZONEN H14 0112
Serial number: 30011500041629
Coding: 360211B8210000
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_AirCondiComfoUDS 003008
ROD: EV_AirCondiComfoUDS_003.rod
VCID: 6386BD646AA02657E4-8036
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 4H0-907-063-V2.clb
Part No SW: 4H0 907 063 DH HW: 4H0 907 063 AH
Component: BCM1 2.0 H20 0311
Revision: 15020001 Serial number: 00001002845902
Coding: 2600001500349FE08181408380001D0CCF9CE60826090201000008206101150200400025030000
Shop #: WSC 02391 785 00200
VCID: 71AAC72CA85C84C766-8024
Subsystem 1 - Part No SW: 4G1 955 119 HW: 4G8 955 119 Labels: 1KX-955-119.CLB
Component: WWS57X 150124 H37 0080
Serial number: 150130081946
Coding: 0045F7
Subsystem 2 - Part No SW: 8U0 955 559 B HW: 8U0 955 559 B Labels: 8U0-955-559.CLB
Component: G397_RLFS H06 0002
Serial number: 23704895
Coding: 02006D
Subsystem 3 - Part No SW: 4G0 941 531 BG HW: 4G0 941 531 BG
Component: E1 - LDS H07 0044
Serial number: 28 02 2014 00001000
Subsystem 4 - Part No SW: 4H0 907 658 HW: 4H0 907 658
Component: AQ_Hum_Sensor H03 0003
Serial number: DBD80197000000000001
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:* 4H0-959-655.clb
Part No SW: 4H0 959 655 H HW: 4H0 959 655 H
Component: Airbag10.43 H82 0086
Revision: -------- Serial number: 003P10033D6B
Coding: 30333130313730323736554A304C34473053
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_AirbaAU10BPAAU64X 001014
ROD: EV_AirbaAU10BPAAU64X_VW51.rod
VCID: 3B362504B2903E978C-806E
Crash sensor for side airbag: driver side:
Serial number: 3575HRB405P33HNGA0R-
Crash sensor for side airbag: front passenger side:
Serial number: 3585HRB405D33RVK81T5
Crash sensor for side airbag: rear: driver side:
Serial number: 3515JRB4016533VUN1QW
Crash sensor for side airbag: rear: passenger side:
Serial number: 3525JRB4006534EADOSB
Crash sensor for front airbag: driver side:
Serial number: 3554VRB400S52RDAI1CY
Crash sensor for front airbag: front passenger side:
Serial number: 3564VRB401052RDAO269
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel (J527) Labels:. 4H0-953-568.clb
Part No SW: 4H0 953 568 K HW: 4H0 953 568 K
Component: Lenks.Modul H06 0005
Revision: C0068538 Serial number: 90862OB500081
Coding: 000015
Shop #: WSC 02391 785 00200
VCID: 3B362504BA903E978C-806E
Subsystem 1 - Part No SW: 4G0 951 528 C HW: 4G0 951 528 C
Component: E221 - MFL H08 0010
Serial number: 17 12 2014 E0064336
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 4H0-920-xxx-17.clb-SRI1
Part No SW: 4G8 920 933 Q HW: 4G8 920 933 Q
Component: TDieRdw H07 0043
Revision: 03001036 Serial number: 658050215596016
Coding: 03AF12000B550008020000
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_RBD4K 004048
ROD: EV_RBD4K_AU57.rod
VCID: 3E302C10A1822BBFAB-806A
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:* None
Part No SW: 4G8 907 468 HW: 4G8 907 468
Component: J533--Gateway H13 0075
Revision: -------- Serial number: 00000001719911
Coding: C0CD078118
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_GatewPkoUDS 001024
ROD: EV_GatewPkoUDS_001_AU57.rod
VCID: 75A2F33CD434A8E7BA-8020
Battery Monitoring Control Module:
Subsystem 1 - Part No SW: 8T0 915 181 HW: 8T0 915 181
Component: J367-BDMHella H03 8041
Serial number: 3565135603
Voltage stabilizer:
Subsystem 2 - Part No SW: 8K0 959 663 F HW: 8K0 959 663 F
Component: J532_DCDCStab H23 0022
Serial number: 14112700000000000490
No fault code found.
-------------------------------------------------------------------------------
Address 28: HVAC, Rear (E265) Labels:* 4G0-919-158.clb
Part No SW: 4G0 919 158 R HW: 4G0 919 158 R
Component: KLIMA FOND H08 0112
Serial number: 04021500040558
Coding: 20
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_ClimaContrUnitRearUDS 003004
ROD: EV_ClimaContrUnitRearUDS_003.rod
VCID: 3E302C10A1822BBFAB-806A
No fault code found.
-------------------------------------------------------------------------------
Address 36: Seat Mem. Drvr (J136) Labels: None
Part No SW: 4G8 959 760 HW: 4G8 959 760
Component: MEM-FS H03 0157
Revision: AA000000 Serial number: 00000134103691
Coding: 0058130000006001000001010101102030303232203232
Shop #: WSC 02391 785 00200
VCID: 77BEF934C638DAF7A8-8022
No fault code found.
-------------------------------------------------------------------------------
Address 3B: Sensor Elect. (J849) Labels: 4G0-907-637.clb
Part No SW: 4G0 907 637 K HW: 4G0 907 637 F
Component: SARA 6D H04 0056
Revision: -------- Serial number: EJ1BPA820BD7D5
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_SARA2 005012
ROD: EV_SARA2.rod
VCID: 3620343089B2E3FF73-8062
No fault code found.
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386) Labels:. 4H0-959-793.clb
Part No SW: 4G8 959 793 J HW: 4G8 959 793 G
Component: TSG FA H03 0507
Revision: -------- Serial number: --------------
Coding: 011F17014E00628002080002
Shop #: WSC 02391 785 00200
VCID: 47DE49F4F6586A7718-8012
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist (J500) Labels:| 4G0-909-144.clb
Part No SW: 4G0 909 144 M HW: 4G0 909 144 G
Component: RCEPS H41 0011
Revision: 00001000 Serial number: 0008397702
Coding: 101000010001
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_RCEPS 009010
ROD: EV_RCEPS_009.rod
VCID: 33260D249AC0F6D754-8066
No fault code found.
-------------------------------------------------------------------------------
Address 46: Central Conv. (J393) Labels:. 4H0-907-064-46.clb
Part No SW: 4H0 907 064 FN HW: 4H0 907 064 EN
Component: BCM2 2.0 H36 0560
Revision: 00002001 Serial number: 0359813205
Coding: 0100063820B930008320090028010F470000000000000000000000000000
Shop #: WSC 02391 785 00200
VCID: 7AB8E000F52AC79FD7-802E
No fault code found.
-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387) Labels:. 4H0-959-792.clb
Part No SW: 4G8 959 792 J HW: 4G8 959 792 G
Component: TSG BF H03 0507
Revision: -------- Serial number: --------------
Coding: 011F17014E00628002080002
Shop #: WSC 02391 785 00200
VCID: 46C044F0F152737FE3-8012
No fault code found.
-------------------------------------------------------------------------------
Address 53: Parking Brake (----) Labels: 4H0-907-801.clb
Part No SW: 4H0 907 801 H HW: 4H0 907 801 A
Component: EPB-4 H04 0015
Revision: -------- Serial number: 00000001356261
ASAM Dataset: EV_ParkiBrake 001028
ROD: EV_ParkiBrake_VW51.rod
VCID: 2D121B5C7CE4A02702-8078
No fault code found.
-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794) Labels:* 4G1-035-MIB-HGH2.clb
Part No SW: 4G1 035 044 D HW: 4G1 035 044
Component: MU-H-LN-EU 041 0389
Serial number: A589B0F7507774
Coding: 01750201FF0A000013110001000A00132F0006E5F1700100DF
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_MUHig6C3Gen2HBAS 001115
ROD: EV_MUHig6C3Gen2HBAS_AU57.rod
VCID: 200CF2683B367D4FB9-8074
Data medium:
Subsystem 1 - Part No SW: V03 959 801 FD HW: -----------
Component: ECE 2017/2018 --- 0161
Serial number: --------------------
Display unit 1 for multimedia system:
Subsystem 2 - Part No SW: 4G1 919 605 A HW: 4G1 919 605 A
Component: DU8 C7 SV H63 0007
Serial number: AUZ8Z9FY8013QG
Multimedia Operating Unit:
Subsystem 3 - Part No SW: 4G1 919 610 F HW: 4G1 919 610 F
Component: E380 BDT C7 H20 0250
Serial number: 90349OB2000V5
Compact Disc Database:
Subsystem 4 - Part No SW: V03 959 800 EG HW: -----------
Component: Gracenote2 --- 1012
Serial number: --------------------
No fault code found.
-------------------------------------------------------------------------------
Address 62: Door, Rear Left (J388) Labels: None
Part No SW: 4G8 959 795 J HW: 4G8 959 795 G
Component: TSG HL H03 0507
Revision: -------- Serial number: --------------
Coding: 010F15004000628002080002
Shop #: WSC 02391 785 00200
VCID: 49DA4FCCE04C9C070E-801C
No fault code found.
-------------------------------------------------------------------------------
Address 69: Trailer (J345) Labels:| 4H0-907-383-V2.clb
Part No SW: 4G8 907 383 B HW: 4G8 907 383 B
Component: Anhaenger H14 0137
Revision: 7B001001 Serial number: 0359195306
Coding: 0100000202000000
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_TrailFunctGener2Hella 001005
ROD: EV_TrailFunctGener2Hella_VW26.rod
VCID: 33260D249AC0F6D754-8066
No fault code found.
-------------------------------------------------------------------------------
Address 6C: Back-up Cam. (J772) Labels:| 4S0-980-556.clb
Part No SW: 4S0 980 556 A HW: 5Q0 980 556 B
Component: RVC Compact H12 0201
Coding: 0275000103002007000040
Shop #: WSC 17873 123 50804
ASAM Dataset: EV_CamSysRVRVCPANAAU57X 002003
ROD: EV_CamSysRVRVCPANAAU57X_002_AU57.rod
VCID: 393A3F0CB8AC0C879E-806C
1 Fault Found:
10489856 - No Basic Setting
B2010 00 [009] - -
[RearView system not calibrated]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 5
Fault Frequency: 1
Reset counter: 79
Mileage: 97885 km
Date: 2019.09.12
Time: 21:30:05
passive
-------------------------------------------------------------------------------
Address 6D: Trunk Elect. (----) Labels:* Redir Fail!
Part No SW: 4G9 959 107 C HW: 4G9 959 107 B
Component: HDSG-Modul H05 0150
Revision: 14005001 Serial number: 022501421
Coding: 093205C011
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_HDSGAu572 001022
ROD: EV_HDSGAu571.rod
VCID: 3620343089B2E3FF73-8062
No fault code found.
-------------------------------------------------------------------------------
Address 72: Door, Rear Right (J389) Labels: None
Part No SW: 4G8 959 795 J HW: 4G8 959 795 G
Component: TSG HR H03 0507
Revision: -------- Serial number: --------------
Coding: 010F15004000628002080002
Shop #: WSC 02391 785 00200
VCID: 49DA4FCCE04C9C070E-801C
No fault code found.
-------------------------------------------------------------------------------
Address 82: Heads Up Display (J898) Labels:| 4G0-919-604.clb
Part No SW: 4G0 919 604 M HW: 4G0 919 604 M
Component: HeadUpDisplay H07 0304
Revision: 00000000 Serial number: 00000000000000
Coding: AF0000
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_HUDContiC7 001025
ROD: EV_HUDContiC7.rod
VCID: 3522333C94B4E8E77A-8060
No fault code found.
-------------------------------------------------------------------------------
Address 85: On Board Cam. (J852) Labels:| 7P6-907-217.clb
Part No SW: 4H0 907 217 F HW: 4H0 907 217 A
Component: DPC-SG H27 0081
Revision: -------- Serial number: 262130025421000
Coding: 71060000
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_OnBoardCamerDPC 001007
ROD: EV_OnBoardCamerDPC.rod
VCID: 2C14165847FEA92F15-8078
No fault code found.
-------------------------------------------------------------------------------
Address 8E: Image Processing (J851) Labels:| 4H0-907-107-V2.clb
Part No SW: 4H0 907 107 H HW: 4H0 907 107
Component: BV-SG H33 0090
Serial number: 005000620809157
Coding: 0440A9181111
Shop #: WSC 05745 128 28888
ASAM Dataset: EV_BC7 001001
ROD: EV_BC7.rod
VCID: 2C14165847FEA92F15-8078
No fault code found.
-------------------------------------------------------------------------------
Address 8F: Pretens. Frt Left (J854) Labels: 4H0-980-94x-RGS.clb
Part No SW: 4H0 980 945 B HW: 4H0 980 945 C
Component: RGS-VL H13 0080
Coding: 00060000031F030000030801424CDA010000
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_RGS_L 002004
ROD: EV_RGS_L.rod
VCID: 312A072C60DCC4C726-8064
No fault code found.
-------------------------------------------------------------------------------
Address 90: Pretens. Frt Right (J855) Labels: 4H0-980-94x-RGS.clb
Part No SW: 4H0 980 946 B HW: 4H0 980 946 C
Component: RGS-VR H13 0080
Coding: 00060000031F030000030801424CDA010000
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_RGS_R 002004
ROD: EV_RGS_R.rod
VCID: 3228082065DAFFDF5F-8066
No fault code found.
-------------------------------------------------------------------------------
Address AC: Reductant Control (J880) Labels: 4G0-907-355.clb
Part No SW: 4H0 907 355 D HW: 4G0 907 355 B
Component: SCR-Stg-G2 H10 0012
Revision: 00000000 Serial number: 150090361
ASAM Dataset: EV_RDCMA00100 008040
ROD: EV_RDCMA00100_008.rod
VCID: 2D121B5C7CE4A02702-8078
No fault code found.
End----------(Elapsed Time: 01:47, VBatt start/end: 12.5V/12.4V)-----------
Code:
Thursday,12,September,2019,21:39:35:62878
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.6.1.0 (x64) HEX-NET CB: 0.4508.4
Data version: 20190529 DS308.0
www.Ross-Tech.com
UDS Adaptation Channel (1B): IDE04734-Display general maximum speed
Stored value Always
UDS Adaptation Channel (1B): IDE04736-Display end of speed limit symbol
Stored value 1
UDS Adaptation Channel (1B): IDE04737-Display no passing allowed
Stored value activated
UDS Adaptation Channel (1B): IDE04815-Display valid additional signs
Stored value activated
UDS Adaptation Channel (1B): IDE04816-Prioritize additional wetness signs
Stored value activated
UDS Adaptation Channel (60B): ENG122227-ENG117506-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning
Stored value activated
UDS Adaptation Channel (60B): ENG122227-ENG117508-Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning_over_threshold_high
Stored value activated
UDS Adaptation Channel (60B): ENG122227-ENG117636-Car_Function_Adaptations_Gen2-menu_display_road_sign_identification
Stored value activated
UDS Adaptation Channel (60B): ENG122227-ENG117638-Car_Function_Adaptations_Gen2-menu_display_road_sign_identification_over_threshold_high
Stored value activated
UDS Adaptation Channel (64B): ENG122229-ENG117740-Car_Function_List_BAP_Gen2-LDW_HCA_0x19
Stored value activated
UDS Adaptation Channel (64B): ENG122229-ENG117741-Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus
Stored value Terminal 15
UDS Adaptation Channel (64B): ENG122229-ENG117754-Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21
Stored value activated
UDS Adaptation Channel (64B): ENG122229-ENG117755-Car_Function_List_BAP_Gen2-traffic_sign_recognition_0x21_msg_bus
Stored value Terminal 15
Last edited: