- Joined
- Jul 2, 2019
- Messages
- 13
- Reaction score
- 8
- Location
- Nottinghamshire, UK
- VCDS Serial number
- C?ID=243045
Hi all finally sorted the original fault codes were po300 and po301 cylinder no1 misfire . Changed plugs and coil packs as no1 coil pack was faulty anyway . Did a compression test all were ok . Still got bad misfire on no1 cylinder . ? Problem now solved stripped
Inlet manifold to possibly changed no1 injector , the problem turned out to be no1 cylinder swirl flap in the cylinder head had broken . You can only get these I’m told from Audi they come with a new inlet manifold at 380.00 plus vat . The cars my sons so I welded the two pieces back together clean all 4 flaps then rebuilt now the car is running mint again . I would send pics if I knew how to send them . Thanks all . Simon
Inlet manifold to possibly changed no1 injector , the problem turned out to be no1 cylinder swirl flap in the cylinder head had broken . You can only get these I’m told from Audi they come with a new inlet manifold at 380.00 plus vat . The cars my sons so I welded the two pieces back together clean all 4 flaps then rebuilt now the car is running mint again . I would send pics if I knew how to send them . Thanks all . Simon
