(moved from new user forum)
Hello everyone,
I recently tried to do a cruise control update on my A4 B6 tdi quattro 2002.
Thanks to plenty of information on this site, and others, I felt reasonably well prepared.
Figured I needed to upgrade my steering control module from revision F to N to support this, and duly obtained a used module 8E0 953 549 N.
As soon as this is fitted, I get some errors flagged for ABS (as expected) and also the VIN mismatch from the steering controller...
Proceeding to follow the VIN adaptation instructions for steering module 16 (select channel 81, enter 00111 as new value) I am now stumped, as the "new value" field is greyed out, and hitting "read" has no effect...
Can anyone throw any light on this?
I actually assumed it was a faulty 8E0 953 549 N module and decided to obtain a second module. In the meantime I replaced my N module with the original F and performed G85 steering calibration, ABS recoding, and ABS/ESR system test (all required to get the ABS back functioning, and achieved all that, though not without a little frustration!).
Now I have refitted the second N module and am back in the same situation, unable to relearn the VIN as "New Value" cannot be entered.
Doubly stumped. Any ideas?
Here is the full autoscan of the car, should this be of interest...
(There are a few "permanent faults" including the engine solenoid valve, the alarm battery is dead causing central convenience issues, and the AC faults 01810 - Actuating Motor for Temperature Flap; Right (V159)
41-10 - Blocked or No Voltage - Intermittent
00716 - Air recirculation Flap Positioning Motor (V113)
41-00 - Blocked or No Voltage
which are presumably associated with the annoying "hunting" noises that come from the flap motors in the AC when the car sits after stopping the engine, and if anyone know how to stop this I would be very happy! All in all the car runs well and does not throw up any other spurious faults, the AC never worked since I got it 4 years ago).
Hello everyone,
I recently tried to do a cruise control update on my A4 B6 tdi quattro 2002.
Thanks to plenty of information on this site, and others, I felt reasonably well prepared.
Figured I needed to upgrade my steering control module from revision F to N to support this, and duly obtained a used module 8E0 953 549 N.
As soon as this is fitted, I get some errors flagged for ABS (as expected) and also the VIN mismatch from the steering controller...
Proceeding to follow the VIN adaptation instructions for steering module 16 (select channel 81, enter 00111 as new value) I am now stumped, as the "new value" field is greyed out, and hitting "read" has no effect...
Can anyone throw any light on this?
I actually assumed it was a faulty 8E0 953 549 N module and decided to obtain a second module. In the meantime I replaced my N module with the original F and performed G85 steering calibration, ABS recoding, and ABS/ESR system test (all required to get the ABS back functioning, and achieved all that, though not without a little frustration!).
Now I have refitted the second N module and am back in the same situation, unable to relearn the VIN as "New Value" cannot be entered.
Doubly stumped. Any ideas?
Here is the full autoscan of the car, should this be of interest...
(There are a few "permanent faults" including the engine solenoid valve, the alarm battery is dead causing central convenience issues, and the AC faults 01810 - Actuating Motor for Temperature Flap; Right (V159)
41-10 - Blocked or No Voltage - Intermittent
00716 - Air recirculation Flap Positioning Motor (V113)
41-00 - Blocked or No Voltage
which are presumably associated with the annoying "hunting" noises that come from the flap motors in the AC when the car sits after stopping the engine, and if anyone know how to stop this I would be very happy! All in all the car runs well and does not throw up any other spurious faults, the AC never worked since I got it 4 years ago).
Code:
Monday,08,April,2019,16:59:56:45645
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 18.9.1.0 (x64) HEX-V2 CB: 0.4437.4
Data version: 20190114 DS296.0
www.Ross-Tech.com
Dealer/Shop Name: TK
Workshop Code: 444 12345 000000
VIN: WAUZZZ8E73A103297 License Plate: YN52NXV
Mileage: 305090km-189574mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 8E (8E - Audi A4/S4/RS4 B6/B7 (2001 > 2008))
Scan: 01 02 03 08 09 0F 11 15 16 17 18 25 36 37 45 46 55 56 57 65
67 69 75 76 77
VIN: WAUZZZ8E73A103297 Mileage: 305090km-189574miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 038-906-019-AVF.lbl
Part No: 038 906 019 JT
Component: 1,9l R4 EDC 0000SG 1572
Coding: 00003
Shop #: WSC 63351
VCID: 72BD2702ADB40547989-4B3C
WAUZZZ8E73A103297 AUZ6Z0B0145552
1 Fault Found:
17994 - Engine Mount Solenoid Valves (N144/N145)
P1586 - 35-10 - Short to Plus - Intermittent
Readiness: 0 0 X X X
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 8E0-614-517.lbl
Part No: 8E0 614 517 A
Component: ABS/ESP allrad 1726
Coding: 00000
Shop #: WSC 00000
VCID: 26150B5251FC29E7C41-51F2
2 Faults Found:
01044 - Control Module Incorrectly Coded
35-00 - -
00778 - Steering Angle Sensor (G85)
66-10 - Not Matched - Intermittent
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 8E0-820-043.lbl
Part No: 8E0 820 043 B
Component: A4 Klimaautomat 1012
Coding: 00000
Shop #: WSC 63351
VCID: 20191D4A33D8C7D7BED-5160
3 Faults Found:
01810 - Actuating Motor for Temperature Flap; Right (V159)
41-10 - Blocked or No Voltage - Intermittent
00716 - Air recirculation Flap Positioning Motor (V113)
41-00 - Blocked or No Voltage
00819 - High Pressure Sensor (G65)
07-10 - Signal too Low - Intermittent
-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels: 8E0-907-279-8E2.lbl
Part No: 8E0 907 279 E
Component: int. Lastmodul RDW 0305
Coding: 00001
Shop #: WSC 63351
VCID: 3431E11A97204B774A5-4B1E
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 8E0-959-655-84.lbl
Part No: 8E0 959 655 B
Component: Airbag 8.4EP 2000
Coding: 0010602
Shop #: WSC 63351 000 00000
VCID: 3635DB12845C5967741-5184
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8E0-953-549.lbl
Part No: 8E0 953 549 N
Component: Lenksáulenmodul 0308
Coding: 00042
Shop #: WSC 12345
VCID: 3E25C332A96C9127AC1-4B1E
1 Fault Found:
01794 - Control Module - Incorrect Chassis (VIN) Number
35-00 - -
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 8E0-920-9xx-8E2.lbl
Part No: 8E0 920 950 J
Component: KOMBI+WEGFAHRS. RB4 D35
Coding: 01400
Shop #: WSC 00001
VCID: 3039ED0A633877572ED-5184
WAUZZZ8E73A103297 AUZ6Z0B0145552
1 Fault Found:
01316 - ABS Control Module
49-10 - No Communications - Intermittent
-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 8E0-951-177.lbl
Part No: 8E0 951 177
Component: Innenraumueberw. 0604
Coding: 00001
Shop #: WSC 00000
VCID: 6B833A668A9ED48F5BF-5118
No fault code found.
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels:. 8E0-959-433-MAX.clb
Part No: 8E0 959 433 BC
Component: Komfortgerát T3B 1110
Coding: 07115
Shop #: WSC 63351
VCID: 73B32206D2AE0C4F93F-4B1E
Subsystem 1 - Part No: 8E2959802B
Component: Tõrsteuer.FS BRM 0002
Component: Tõrsteuer.BF BRM 0002
3 Faults Found:
01134 - Alarm Horn (H12)
29-00 - Short to Ground
00955 - Key 1
35-10 - - - Intermittent
01562 - Rear right door
61-10 - Won't De-Safe - Intermittent
-------------------------------------------------------------------------------
Address 56: Radio Labels: 8E0-035-1xx-56.lbl
Part No: 8E0 035 195 C
Component: symphony II NP2 0151
Coding: 01201
Shop #: WSC 00757
VCID: 270B065656C630EFFF7-4E62
No fault code found.
End----------(Elapsed Time: 05:35, VBatt start/end: 12.1V/12.0V)-----------