Hi,
I am Getting looks like one half week interval and about 900 Miles driving same DPF errors. Anyone have any suggestion what to do or what is the issue would be? Here is the two errors:
Second one:
Any help or suggestion appreciated.
I am Getting looks like one half week interval and about 900 Miles driving same DPF errors. Anyone have any suggestion what to do or what is the issue would be? Here is the two errors:
Code:
1 Fault Found:
29012 - Diesel Particulate Filter (Bank 1)
P226D 00 [237] - Damaged or Subrate Missing
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 2
Mileage: 68188 km
Date: 2018.10.24
Time: 06:43:48
Engine speed: 1736.50 /min
Normed load value: 93.3 %
Vehicle speed: 128 km/h
Coolant temperature: 89 °C
Intake air temperature: 16 °C
Ambient air pressure: 1010 mbar
Voltage terminal 30: 14.160 V
Unlearning counter according OBD: 40
Particle filter: soot mass measured: 5.59 g
Particle filter: soot mass calculated: 10.63 g
Particle sensor: exhust speed: 26.86 m/s
Particle sensor: soot volume in exhaust: 0.90 mg/m³
Particle sensor: exhaust temperature: 255.0 °C
Particle sensor: cleaning deviation reaction time: 1.000
Readiness: 1 1 0 0 0
-------------------------------------------------------------------------
Second one:
Code:
2 Faults Found:
22838 - Diesel Particulate Filter (Bank 1)
P226D 00 [237] - Damaged or Subrate Missing
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 2
Mileage: 69810 km
Date: 2018.11.07
Time: 06:14:11
Engine speed: 1615.00 /min
Normed load value: 0.0 %
Vehicle speed: 120 km/h
Coolant temperature: 86 °C
Intake air temperature: 13 °C
Ambient air pressure: 980 mbar
Voltage terminal 30: 14.160 V
Unlearning counter according OBD: 40
Engine status: COENG_RUNNING
Engine status-Test_Program_Co Eng st COMPU VERB UBYTE: 3
29012 - Diesel Particulate Filter (Bank 1)
P226D 00 [237] - Damaged or Subrate Missing
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 69810 km
Date: 2018.11.07
Time: 06:14:11
Engine speed: 1615.00 /min
Normed load value: 0.0 %
Vehicle speed: 120 km/h
Coolant temperature: 86 °C
Intake air temperature: 13 °C
Ambient air pressure: 980 mbar
Voltage terminal 30: 14.160 V
Unlearning counter according OBD: 40
Particle filter: soot mass measured: 6.97 g
Particle filter: soot mass calculated: 12.68 g
Particle sensor: exhust speed: 8.74 m/s
Particle sensor: soot volume in exhaust: 0.00 mg/m³
Particle sensor: exhaust temperature: 251.2 °C
Particle sensor: cleaning deviation reaction time: 0.205
Readiness: 1 2 0 0 0
--------------------------------------------------------------
Any help or suggestion appreciated.
Last edited by a moderator: