Possible to turn off bulb error light on VW Jetta 2016

Status
Not open for further replies.
   #21  
Zenerdiode

Zenerdiode

Verified VCDS User
Verified
Joined
Jun 26, 2014
Messages
1,416
Reaction score
2,127
Location
Newcastle, England
VCDS Serial number
C?ID=24330
Uwe said:
Ohms-law-cartoon-by_unknown.jpg
Click to expand...

[Sigh]
This sums up my daily life at work.

Volt: My boss.
Ohm: Our Rules, Standards and Bureaucracy.
Amp: Me. Struggling. Scratching through the dirt, doing all of the work. Measured by my friend; Watt. :(
 
   #23  
B

Borja

Verified VCDS User
Verified
Joined
Sep 22, 2018
Messages
13
Reaction score
1
Location
Mexico City
VCDS Serial number
C?ID=326888
Hello Iichel

I see regardinf the BCM that i have, all of the lights from the LED cluster Works but i just want to confirm if there was any option to clear this BULB warning
 
   #24  
B

Borja

Verified VCDS User
Verified
Joined
Sep 22, 2018
Messages
13
Reaction score
1
Location
Mexico City
VCDS Serial number
C?ID=326888
PetrolDave said:
Sounds like your best option is to add resistors in parallel with the indicator LEDs - this is what I had to do on my other car (a Citroen C1) to make them flash at the correct rate.
Click to expand...

Hello Petrol

I add the Led resistor and a pair of Diodes to switch from the stop light and the stop indicators ; D

Thanks
 
   #25  
M

myounus

Verified VCDS User
Verified
Joined
Oct 17, 2017
Messages
982
Reaction score
505
Location
Northwest UK
VCDS Serial number
C?ID=321059
Hi Borja

The only way to clear the warning light is to fix resistors to the indicator lights as it appears that this BCM does not have another way. You would probably need to get 50w resistors - one for each side. Be careful where you mount them as they get very hot.
 
Status
Not open for further replies.
Back
Top