4B error code

hello, 2018 model golf fl. I have a 1.0 tsi car. giving error code.

Address 4B: Multifunc. Module Labels: NONE
Control Module Part Number: 3Q0 907 338 HW: 3Q0 907 338
Component and/or Version: FCM MQB Low 002 0286
Software Coding: 00000007010016420000010002000000000000000000000000 0000000000
Work Shop Code: WSC 01357 011 00200
ASAM Dataset: EV_MultiModulContiVW48X 001010 (VW37)
ROD: EV_MultiModulContiVW48X.rod
VCID: 72BDD9E694261AA7770-8026
1 Fault Found:

0032 - Headlight
C107E 54 [137] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 125
Mileage: 2519 km
Date: 2018.09.11

So maybe do a basic setting of the headlight.

When asking for assistance, we ask that you provide a full Auto-Scan:
https://forums.ross-tech.com/showthread.php?101-How-to-post-an-Auto-Scan

I would try this first these basic setting steps:

[Basic Settings - 04]
Select Basic headlamp setting from the drop-down menu.
[Go!] to activate the Basic Setting.

The meas. block field will show Running.
Adjust the headlights using their manual adjusting screws as referenced against a suitable aiming target.

[Stop] after any needed mechanical adjustments are completed.

Select Acknowledge basic setting
[Go!] to activate the Basic Setting.
The adjustment should now be learned.
[Stop]
[Done, Go Back]

ok sir, thank you very much, it worked