Skoda rear fog light

Status
Not open for further replies.
   #1  

mattft86

Verified VCDS User
Verified
Joined
May 22, 2017
Messages
86
Reaction score
8
Location
UK
VCDS Serial number
C?ID=525197
Hi all my 2011 skoda octavia vrs has two rear fog lights but only the right one comes on. I ran a wire from the right to the left it works but I get a bulb out warning and then they turn off. Is there a way I can code it to come on in vcds?

Thanks matt
 
   #2  

Enriquez

Verified VCDS User
Verified
Joined
Mar 24, 2014
Messages
97
Reaction score
59
Location
Poland
VCDS Serial number
C?ID=72075
You cannot do it with VCDS. You need other tool with no safety restrictions.
 
   #3  

mattft86

Verified VCDS User
Verified
Joined
May 22, 2017
Messages
86
Reaction score
8
Location
UK
VCDS Serial number
C?ID=525197
Ah ok thought I saw somewhere it could be done with the security access code
 
   #5  

Enriquez

Verified VCDS User
Verified
Joined
Mar 24, 2014
Messages
97
Reaction score
59
Location
Poland
VCDS Serial number
C?ID=72075
This is for Octy 3, your is 2...
Basically as a hint, using the tool which allows to modify the direct memory cells, You need to change the following address:

3073 from 31 to 71 (HEX)
Security code for BCM is 42013
 
   #6  

mattft86

Verified VCDS User
Verified
Joined
May 22, 2017
Messages
86
Reaction score
8
Location
UK
VCDS Serial number
C?ID=525197
Ah ok thank you I'll give it a try later. I also stuck in some LED number plate lights and unchecked the number plate box in vcds but it also still throws up a bulb error?
 
   #8  

mattft86

Verified VCDS User
Verified
Joined
May 22, 2017
Messages
86
Reaction score
8
Location
UK
VCDS Serial number
C?ID=525197
What would the correct tool be?
 
   #9  

langers2k

Verified VCDS User
Verified
Joined
Oct 20, 2014
Messages
467
Reaction score
441
Location
UK
VCDS Serial number
C?ID=224085
ODIS-e or VCP are good choices.
 
Status
Not open for further replies.
Back
Top