Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Case Study: A5 / S5 Audi Cabriolet top issue B11A0

  1. #11
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    18,565
    Post Thanks / Like
    Another stack chalked up & missing stuff due to yet again, too many Heffy's again!

    A mere distraction.......
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  2. #12
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    3,879
    Post Thanks / Like
    Sorry for bumping an old thread but I just spoke to a customer regarding that DTC and realized the main Audi A5 Cabriolet (FH) Auto Roof Wiki page wasn't linked here. I don't believe that Wiki page existed when Jef created this post.

    Either way, there's a newer version of the video and an entire list of IDEs on this page: http://wiki.ross-tech.com/wiki/index...(FH)_Auto_Roof

  3. Likes Uwe liked this post
  4. #13
    Verified VCDS User
    Join Date
    Dec 2019
    Location
    USA
    Posts
    1
    Post Thanks / Like
    Hi , I appreciate the video you guys did on the roof operation and your post on the top switch position. I have a 2010 S5 and a bit of water got into the trunk. I placed several of the modules(back up camera, elect suspension, ABS brake) and cleared all the codes...everything is fine in those departments. My convertible top is still throwing some codes, I looked over the fuses, harness and switches and they appear to be clean. I also reset the yellow floppy switches by pushing down the springs(I believe this is for the top comp lid). The top closes fine, but it will not open at all with the "Convertible top can not be operated" message. When I open the top manually(I have gotten really good at this...ha) the cone top lid doesn't close all the way...sticks up about 3/4 of an inch. The previous owner took the car to the dealer and they said he needed a part: 000-979-010-EA (Yellow Wire)– I purchased that, but I don’t know where that wire is located on the vehicle. Below are my codes. Any adea what may be going on? Thank you! Ted

    Code:
    Address 26: Auto Roof (J256)       Labels:* 8F0-959-255.clb
       Part No SW: 8F0 959 255     HW: 8F0 959 255 
       Component: VSG-AUDI-B8   H10 0180  
       Coding: 030000
       Shop #: WSC 02135 785 00200
       ASAM Dataset: EV_ElectRoofContr 001008
       ROD: EV_ElectRoofContr.rod
       VCID: 71E9E6CEA0D6ECC758-8025
    
    3 Faults Found:
    0004 - Switch for Convertible Top 
              B11A0 02 [009] - Signal Failure
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 104
                        Mileage: 160634 km
                        Date: 2009.06.26
                        Time: 00:00:31
    
    0020 - Convertible Top Compartment Switch; Left 
              B1181 29 [008] - Signal Implausible
              Intermittent - Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 2
                        Fault Frequency: 2
                        Reset counter: 40
                        Mileage: 231151 km
                        Date: 2009.07.25
                        Time: 08:23:21
    
    0021 - Convertible Top Compartment Switch; Right 
              B1182 29 [008] - Signal Implausible
              Intermittent - Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 2
                        Fault Frequency: 2
    Last edited by Uwe; Yesterday at 09:41 AM. Reason: CODE tags

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •