Request: adpmap A5 Frt Sens. Drv. Assist with MIBII maps

[Sander]

Hiy,

After swapping my MIBI with a MIBII in my 2014 GOLF the traffic sign recognition is not working properly (factory installed).
I am looking for the adpmap of the A5-5Q0-980-653 form someone who has it working with a MIBII.

The problem I have is that the camera does recognise the traffic signs, but the database of signs in the MIB II is not being used. After a few minutes of driving I get a error of limited TSR.

Thank you!
Sander

 

[welshkaiboy]

I have MIB2 on my Tig but I enabled TSR myself. I can do the admap if you want it.

 

[Sander]

Hiy,
That would be great! You have it working with both the camera and the navigation database?
Greetings,
Sander

 

[welshkaiboy]

Elapsed Time: 00:09
;SW:3Q0-980-654-F   HW:3Q0-980-654 ---  Frt Sens. Drv. Assist
;Component:MQB_B_MFK     H06 0220, Coding:0003070600000401000213448040A10094000E000020
;EV_MFKBoschMQBB,001001,EV_MFKBoschMQBB.rod
;Saturday,31,December,2016,17:24:44:09667
;VCDS Version: Release 16.8.4 (x64)  Data version: 20161129 DS267.0
;VCID: 3A55E97EBD7A5A92C7-806E

IDE00001-Production mode,Deactivating 
IDE00820-ENG130919-Activating and deactivating all development messages-Activation_of_development_messages_EHR,not activated 
IDE00820-ENG130920-Activating and deactivating all development messages-Activation_of_development_messages_HCA_lane,not activated 
IDE00820-ENG130921-Activating and deactivating all development messages-Activation_of_development_messages_HCA_state,not activated 
IDE00820-ENG130922-Activating and deactivating all development messages-Activation_of_development_messages_internal,not activated 
IDE00820-ENG130916-Activating and deactivating all development messages-Activation_of_development_messages_lane,not activated 
IDE00820-ENG130915-Activating and deactivating all development messages-Activation_of_development_messages_reserved,not activated 
IDE00820-ENG130918-Activating and deactivating all development messages-Activation_of_development_messages_VZF/TSR,not activated 
IDE00820-ENG130917-Activating and deactivating all development messages-Activation_of_development_messages_WLA,not activated 
IDE02332-Deactivate production mode,0 
IDE04160-Direct. stab. assist speed threshold during towing mode,300 km/h
IDE04733-Road sign detection fusion mode,Road sign fusion 
IDE06425-Roller test bench mode: functional,not activated 
IDE07358-Distance to calibration field,1500 mm
IDE07596-Personalization of lane dept. warning Cl. 15 on,Last setting 
IDE09375-IDE05717-Axle offset-Front axle transverse position,1.00001 mm
IDE09375-IDE05718-Axle offset-Rear axle transverse position,5.96046e-006 mm
IDE09376-IDE02001-Body height wheel house edge-Body height left front wheel house edge,778 mm
IDE09376-IDE02002-Body height wheel house edge-Body height right front wheel house edge,772 mm
IDE09376-IDE02003-Body height wheel house edge-Body height left rear wheel house edge,799 mm
IDE09376-IDE02004-Body height wheel house edge-Body height right rear wheel house edge,793 mm
IDE09391-MAS08824-Calibration target position-Target 1: calibration mark 1: x-coordinate,2460 mm
IDE09391-MAS08825-Calibration target position-Target 1: calibration mark 1: y-coordinate,742 mm
IDE09391-MAS08826-Calibration target position-Target 1: calibration mark 1: z-coordinate,1697 mm
IDE09391-MAS08827-Calibration target position-Target 1: calibration mark 2: x-coordinate,2460 mm
IDE09391-MAS08828-Calibration target position-Target 1: calibration mark 2: y-coordinate,-742 mm
IDE09391-MAS08829-Calibration target position-Target 1: calibration mark 2: z-coordinate,1697 mm
IDE09391-MAS08830-Calibration target position-Target 1: calibration mark 3: x-coordinate,2460 mm
IDE09391-MAS08831-Calibration target position-Target 1: calibration mark 3: y-coordinate,742 mm
IDE09391-MAS08832-Calibration target position-Target 1: calibration mark 3: z-coordinate,1103 mm
IDE09391-MAS08833-Calibration target position-Target 1: calibration mark 4: x-coordinate,2460 mm
IDE09391-MAS08834-Calibration target position-Target 1: calibration mark 4: y-coordinate,-742 mm
IDE09391-MAS08835-Calibration target position-Target 1: calibration mark 4: z-coordinate,1103 mm
IDE10407-Personalization of intervention moment at T. 15 on,Last setting 
IDE10870-Switch-on condition: lane depart. warn.,on (setting via menu) 
IDE10871-System mode: lane depart. warn:,Steering wheel vibration not active 
IDE10872-Warning intensity: lane depart. warning,Medium 
IDE10873-BAP personalization,activated 
IDE10924-MAS02479-Initial calibration: result-Yaw angle,-0.279 °
IDE10924-MAS05286-Initial calibration: result-Roll angle,-0.142 °
IDE10924-MAS05287-Initial calibration: result-Pitch angle,-0.144 °
IDE10924-MAS10678-Initial calibration: result-Camera height,1475 mm
ENG130776-ENG130840-Adaptation_tsr-Par_country_code_RSR,0 
ENG130776-ENG130841-Adaptation_tsr-Par_country_code_VZF,0 
ENG130776-ENG130838-Adaptation_tsr-Par_country_mode,automatic 
ENG130776-ENG130839-Adaptation_tsr-Par_relevance_mode,Enabled 
ENG120319-Mask_error_reactions_for_development,not activated 
ENG107577-ENG107577-Masked_fault_classes-,255 
ENG107577-ENG107577-Masked_fault_classes-,255 
ENG107577-ENG107577-Masked_fault_classes-,255 
ENG107577-ENG107577-Masked_fault_classes-,255 
ENG130777-standstill_mode,not activated 
ENG130781-ENG130836-WLA_adjustment-BrightnessThreshold_active,12.8 
ENG130781-ENG130837-WLA_adjustment-BrightnessThreshold_passive,0 
ENG130779-Xcp_interface,not activated

This is what I followed to enable my TSR on the Tig http://www.briskoda.net/forums/topi...-vcds-adaptations-tried-and-tested/?p=4476927

 

[Sander]

Thanks a lot! I will test it when it get back from hollidays in a week. Will let you know what the outcome is.

Sander

 

[Sander]

Dear welshkaiboy,

It turns out there are two types of camera's. Yours has a different part number. I guess my camera is just not compatible with the gen 2 discover pro. The adaptations are also different.
Thank you for you help.

Sander

 

[welshkaiboy]

Sander, not good news then.