- Joined
- Feb 19, 2020
- Messages
- 41
- Reaction score
- 11
- Location
- Oregon, USA
- VCDS Serial number
- C?ID=373717
As far as I can tell I've removed the Curt wiring controller from the equation. The module it's self sits behind the driver's side tail light assembly. To get to it I'd have to remove quite a few things including that parcel shelf and the sub box built into it. That is not something I look forward to doing.
It only had 2 wires going to the right side, power and a green wire tied into a Green/BLK wire. I have no idea what that gen/BLK wire is as it doesn't show up in my Chilton's.
Today I'm going to focus on the front as it has started doing similar things as the rear. I'm going to swap a completely untouched headlight into it. The ones I'm currently running have been opened and painted plus a projector retrofit. Looking at the front blinker it's almost like the blinker and running filaments are shorting together.
It only had 2 wires going to the right side, power and a green wire tied into a Green/BLK wire. I have no idea what that gen/BLK wire is as it doesn't show up in my Chilton's.
Today I'm going to focus on the front as it has started doing similar things as the rear. I'm going to swap a completely untouched headlight into it. The ones I'm currently running have been opened and painted plus a projector retrofit. Looking at the front blinker it's almost like the blinker and running filaments are shorting together.