Emanuele
New Member
Hello to everybody, i would install Pdc kit on my audi a3 8v sportback 2014.
Before to install the kit, i would test it.
I connected every cable, sensors adn pdc module, and then i went to code the module, but the Vcds show me this error during coding:
"this control unit appears to be without initialization.
a workshop, importer and appliance number can be requested.
- Click on | YES | to use the standard values of the vcds: 12345/123/12345.
- Click on | NO | to use the values currently stored in the control unit. "
At this point I click on | YES | and the vcds shows me this error: "error 31 request out of range"
So i can't to entry and coding pdc module to work in my car.
The PDC control module is : "5QD919294E"
Can anyone help me please, Thanks to everybody. Sorry for my poor English.
EMANUELE
Before to install the kit, i would test it.
I connected every cable, sensors adn pdc module, and then i went to code the module, but the Vcds show me this error during coding:
"this control unit appears to be without initialization.
a workshop, importer and appliance number can be requested.
- Click on | YES | to use the standard values of the vcds: 12345/123/12345.
- Click on | NO | to use the values currently stored in the control unit. "
At this point I click on | YES | and the vcds shows me this error: "error 31 request out of range"
So i can't to entry and coding pdc module to work in my car.
The PDC control module is : "5QD919294E"
Can anyone help me please, Thanks to everybody. Sorry for my poor English.
EMANUELE