Search results

As coding in 09 shows Address 09: Cent. Elect. (J519) Labels:. 1K0-937-08x-09.clb Coding: 411A581A8025186B08800082900000640301728852028060648000000040 There are no heated seats. Change it to 411A581A8025186B08800082900000640301728852028460648000000040 by marking the seats in byte 22- bit 2

Tire pressure control 7K0 without tire pressure control

Boki Ar suggests overwriting the new control unit with the old coding. Then carry out the basic settings directly without leaving the control unit.

This EPS_TRW_ALow procedure belongs to Piotr Brzezina (User Name "automech" in the Ross-Tech forum). It should resolve DTC P1609 - Crash Shut-Down Activated in vehicles with that steering system installed. http://forums.ross-tech.com/showthread.php?4988-Skoda-Fabia-MY16-Power-Steering-fault...

As uwe described it and if that 131689 - Steuergerät für Rückfahrkamerasystem U104C 00 [008] - keine Kommunikation Versorgungsspannung Klemme 30: 12.5 V Klemme 15: aus appears again check electrical connections:cool:

No, there is only one EDC control unit for both drive variants. But there was a hint to Coding for 4B0-907-401-AB / 4B0-907-401-AC / 4B0-907-401-AD as well 4D0-907-401-M / 4D0-907-401-N differs. For details see TPI 373601/3.:confused:

"but for brand of battery Interstate is not a choice" No, but I think, it's a Varta >> VAO > Manufacturer abbreviation

dead end:cool:

Very sad, no Auto-Scan :facepalm:no answer please follow the rules

keep feet still working people sit at Ross-tech

Address 19: CAN Gateway (J533) Additional Installations Detected You didn't updated the install list in this module. as uwe (Benevolent Dictator :thumbs:) wrote: OK, step 1 is Register the the Trailer Module: [Select] [19-CAN Gateway] [Installation List] - Scroll down to 69-Trailer and put...

I think. the gateway control unit is defective. Disconnect the fiber optic connector Switch on ignition Can you see light at the fiber optic exit? no? then the control unit is defective

checking for trailer / hitch Address 19: CAN Gateway (J533) add 69 in installation list Address 01: Engine (J623-CREC) check for trailer in coding adaption check for the correct engine cooler and fan Address 03: ABS Brakes check for trailer in coding adaption Address 17: Instruments...

Hello Rickyb 1. check installation list from 19-CAN Gateway -- Status: Malfunction for missing modules 2E-Media Player 47-Sound System 56-Radio 2. the readings of 19-CAN Gateway in this channels: 003,1,Electrical Coding 003,2,Ring Break,Diagnostic Wire,0 = Low\n1 = High (~5V)...

https://www.audipartsstore.com/oem-parts/audi-steering-8k1423055cg

Hello Just highjacked from Uwe out of another threat: If it's not in the ASAM/ROD data for his ECU (which I've checked), it's not gonna show up even with a Security Access code (and Login doesn't apply to an ECU like this one that uses the UDS protocol).

That is "Write service interval extension adaptation channel 41-Days since last service,0 Days " Maybe the reason for no resetting SIA

UUpps But Coding in 16 first Coding: 5080040000 Last Scan :rolleyes:Coding: 5800040000

Hello Installation error Control unit 16 not connected correctly Address 16: Steering wheel (J527) Labels:| 5K0-953-569.clb 3 Faults Found: 0516 - Databus 335876 - Powertrain Databus U0002 00 [009] - No Communications

Hello Happens again and again Cable break on the A-pillar, in the bushing