Thanks, so I'd lke to enable drivin profile on my Xcellence (not Lux, in hindsight, really should have just bought Lux) by following:
Switch-on driving profile [WORKING]
1. Control Unit 19 (Gateway)
2. Extended Coding
3. Byte 8 (E8)
4. Activate Bit 4
(After this change, Byte 8 will change from "E8" to "F8")
Would that then enable driving profile? My intention is to have the individual setting that sets accellerator to sport, while sets steering to comfort.
Thanks,
PS> I appreciate you can't be 100% certain, but just a best-effort guess is fine. Thanks,