YAW SENSOR (Lateral acceleration) RESET

[DAZ07]

Can somebody tell me how i can reset the yaw sensor using VCDS lite, i do not have basic setting on/off next, which i have read in other forums i need to rest the sensor. i have replaced a dead one on my audi TT 2001

 

[Uwe]

Can somebody tell me how i can reset the yaw sensor using VCDS lite, i do not have basic setting on/off next, which i have read in other forums i need to rest the sensor. i have replaced a dead one on my audi TT 2001

Please post an Auto-Scan for context, so we can see exactly what ABS module you have.

-Uwe-

 

[DAZ07]

extract below is this what you want?

Self-Diagnosis Log
Thursday, 04 August 2022, 11:00:53:920
VIN Number: TRUZZZ8NZ11035919 Mileage:
License Plate: lfaw414 Repair Order:
Chassis Type: 8N - Audi TT

Address 03: ABS Brakes
Controller: SN0 907 379 E Component: ESP
20
Coding: 18446 Shop#: WSC 01236 VCID: 3E0FBE63296F
2 Faults Found: 01542 - Yaw Rate Sensor (G202) 57-00 - Electric Circuit Failure
00812 - Brake Pressure Release Solenoid (F84) 35-10 - - Intermittent

 

[NZDubNurd]

The first fault code will stop it being able to perform basic settings. You need to check the wiring, but those sensors have been known to fail fairly commonly. They get dry joints inside... which can be resoldered... but it's a sensor for a safety system too, so should probably at least be done by someone who is good at it.