Hi all
I am close to an autohold solution for my 16' vRS without EPB, it will require a little piece of hardware.
For it to work I need to find either:
A) 12v that becomes live once the car is moving, normally 0v
B) 12v that becomes live when the vehicle is stationary which is 0v when the car is moving
So far I've tried the adaption list for the light channels hoping I could use that as a trigger - I thought a few looked promising but I have test them and they don't work
1) Klemme 15 mit Nachlauf bis Fahrzeugstillstand (Terminal 15 with follow-up vehicle standstill)
2) Klemme 15 ohne nachlauf (Terminal 15 without running / trailing)
Ive actually tried all of them and its no good - you can have have a trigger which switches on/off with stop start, and a trigger for handbrake on/off but not vehicle moving/not moving.
I'm looking for any other ideas of a simple trigger for when the vehicle is 1/2mph+, without having to write code into something like an arduino and have a bliuetooth EOBD dongle and having a decoder to extract the data from the EOBD data protocol
Thanks
I am close to an autohold solution for my 16' vRS without EPB, it will require a little piece of hardware.
For it to work I need to find either:
A) 12v that becomes live once the car is moving, normally 0v
B) 12v that becomes live when the vehicle is stationary which is 0v when the car is moving
So far I've tried the adaption list for the light channels hoping I could use that as a trigger - I thought a few looked promising but I have test them and they don't work
1) Klemme 15 mit Nachlauf bis Fahrzeugstillstand (Terminal 15 with follow-up vehicle standstill)
2) Klemme 15 ohne nachlauf (Terminal 15 without running / trailing)
Ive actually tried all of them and its no good - you can have have a trigger which switches on/off with stop start, and a trigger for handbrake on/off but not vehicle moving/not moving.
I'm looking for any other ideas of a simple trigger for when the vehicle is 1/2mph+, without having to write code into something like an arduino and have a bliuetooth EOBD dongle and having a decoder to extract the data from the EOBD data protocol
Thanks