I have recently installed a Emblem Reversing Camera on my 2013 Beetle which is fitted with an RNS510 and it's working OK but Can I change the default screen from the Plan view illustration from the Optical Park System to the Camera as the default ? It would to have the Camera view each time I select reverse rather than having to select it each time. At the moment each time Reverse is selected I have to manually select the reverse camera and also when I select the camera view there are a few different views show, on the right of the screen shows a X to close the screen, a mute selection for the optical park warning sounds, Contrast settings adjustments and the fourth selection is to change back from Camera to the plan view optical sensor. Also generally on the left of the camera screen normally it show a plan view of the car but this doesn’t so can any of these selections be tweaked with VCDS ?