Does the polo 6c have an extended can?

Or does it support an extended can?

Reason for asking is i would like to add High TPMS to the car and think this would be needed for it to work!!!

Thanks

scott

Fair assumption is that it does support it, yeah. More interesting is if there are any other control units currently installed that also use the extended CAN. If there aren’t any it could be that the gateway needs a little more than coding or maybe a different gateway. I’d pull the wiring diagram and the vehicle configuration list from elsa and see whats installed and where.

Extended can is grey/orange(can-high) and brown/orange(can-low). Can low wires are always the same color, can high is unique. So you could take a look at the wiring near the gateway to see if you can spot a grey/orange wire. Other than that, my tiguan has the radar sensor and front camera on the extended can, amongst others. But that doesnt really say anything.

golfman said:

Or does it support an extended can?

Reason for asking is i would like to add High TPMS to the car and think this would be needed for it to work!!!

Thanks

scott

Click to expand...

scott: Found this in my database of stuff (I stored the picture of the CAN Network in "miscellaneous" -which is a very dangerous folder to have)!



Alas it's in French, but Mr Google says that Bus de données CAN Extended is Extended CAN data bus, so MasterTommy's assumption looks to be correct!!

Don

you'll also need to check if cluster supports high tpms, as it regulates which tires and pressures are to be stored/used

I believe i will have to check if my BCM has the pins for the wiring to go in too!!!!

Does anyone have any info on how to code the TPMS in i.e. BCM/Adaptions/Long Coding or Gateway/Cluster/ABS?

It would help big time.

Thank you

scott

I have checked my BCM and it has the pins for the wiring to go into......but can anyone help with the Original TPMS and the Highline TPMS ABS coding????????

Can the original TPMS be coded out of the cars ABS and the Highline one added?

Here is my ABS with long coding!!!!
Address 03: ABS Brakes (J104) Labels:. 6R0-907-37x-ESP90.clb
Part No SW: 6C0 907 379 HW: 6R0 907 379 BA
Component: ESP9.0i H03 0002
Serial number: 08510702140901
Coding: 23DD2485492733C20914106E0053C42492CC90080005C7090C00
Shop #: WSC 03743 444 00001
ASAM Dataset: EV_Brake1ESP90iBOSCHPQ26 100015
ROD: EV_Brake1ESP90iBOSCHPQ26.rod
VCID: 6CDCD4A187362F2646-8038

No fault code found.

If you need to see a full scan go to this page at the very bottom and it has a full scan from my polo
http://forums.ross-tech.com/showthr...10-shaded-out-can-Ross-Tech-please-help/page3

Many Thanks

Scott

BCM? Unless a polo is substantially different the extended can goes to the gateway, not the BCM.

MasterTommy said:

BCM? Unless a polo is substantially different the extended can goes to the gateway, not the BCM.

Click to expand...

No that is a wrong assumption, the Polo 6C has the gateway integrated in the BCM.

Does anyone have any info on the ABS for the highline TPMS to be coded?

scott

No since it's never factory fitted on pq26