VW Fox 1.2 55hp 2006y - problem with G250 power steering sensor - fault 00816

   #1  

fletcherlynd

New Member
Joined
Apr 5, 2024
Messages
4
Reaction score
1
Location
Bulgaria
Hi all,

I'm having problems with my hydraulic system for the steering. A yellow light poped up days ago and the fault was:

00816 - Power Steering Sensor (G250): Short to Ground
then all other combinations:
00816 - Power Steering Sensor (G250): Open or Short to Plus
00816 - Power Steering Sensor (G250): Faulty

I've check fuild level, flushed the system and filled new fluid, checked conectors on pumps' end and treated them with contact spray. The light goes off for an ignition or two and then again pops up. The steering is not heavy. I believe the pump has been replaced (I'm the second owner) as the new one TRW is labled 20.08.2014. The model is TRW 6r0423156c v278.

Current coding is 10110. I'm not in deep knowedege of this and I've read some treads here where for the same problem recoding is needed. My question is what should be the input for the new code?

Other suggestions are for weak battery - also repalced (47ah 360A) and I'm checking on the alternator as the values vary in the low end 13.20v - 13.66v.

 
   #2  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
8,072
Reaction score
7,887
Location
Westbury, UK
VCDS Serial number
C?ID=1423
We can't suggest any coding until you post an Auto-Scan made using the English version of VCDS since not all VW Fox vehicles are equipped and configured the same.
 
  • Like
Reactions: Uwe
   #3  

fletcherlynd

New Member
Joined
Apr 5, 2024
Messages
4
Reaction score
1
Location
Bulgaria
Hi please find attached. I'm using the vcds lite version on an old Acer Aspire One :)


Code:
Windows Based VAG/VAS Emulator Version: Release 1.2 www.Ross-Tech.com

Workshop Code: 000 00000 Self-Diagnosis Log​
Wednesday, 10 April 2024, 08:04:40:0
VIN Number: WVWZZZ5ZZ64098513 License Plate: Mileage: Repair Order:​
Chassis Type: 5Z - VW Fox Scan: 01,03,08,09,15,17,19,44,46,56 ------------------------------------------------------------------------------- Address 01: Engine Labels: Redir Fail! Controller: 03D 906 033 H Component: 1,2l/2V SIMOS3 00HS4503 Coding: 00071 Shop #: WSC 00000 VCID: 243B6F93A7C3 WVWZZZ5ZZ64098513 VWZ5Z0E9141499 No fault code found. Readiness: 0000 0000 ------------------------------------------------------------------------------- Address 03: ABS Brakes Labels: Redir Fail! Controller: 5Z0 907 379 A Component: ABS 8.0 front H00 0004 Coding: 0000004 Shop #: WSC 00000 VCID: 43F9CC0F428D No fault code found. ------------------------------------------------------------------------------- Address 08: Auto HVAC Labels: 6Q0-820-045.LBL Controller: 6Q0 820 045 Component: Klimaanlage X0840 VCID: EAA7C1AB8567 No fault code found. ------------------------------------------------------------------------------- Address 09: Cent. Elect. Labels: 6Qx-937-049-B.LBL Controller: 6Q1 937 049 D Component: 0000 BN-SG. 1S34 Coding: 24588 Shop #: WSC 00000 VCID: 3C0BB7F33F73 No fault code found. ------------------------------------------------------------------------------- Self-Diagnosis Log Wednesday, 10 April 2024, 08:04:40:0 Page 2 VIN Number: WVWZZZ5ZZ64098513 License Plate: Address 15: Airbags Labels: 6Q0-909-605-VW5.LBL Controller: 1C0 909 605 K Component: 1M AIRBAG VW51 0008 Coding: 12621 Shop #: WSC 00000 VCID: 2C2B87B3CF13 No fault code found. ------------------------------------------------------------------------------- Address 17: Instruments Labels: 5Zx-920-xxx-17.LBL Controller: 5Z0 920 820 N Component: KOMBI+WEGFAHRS. M73 0013 Coding: 00132 Shop #: WSC 73075 VCID: 42F7C90B5D97 WVWZZZ5ZZ64098513 VWZ5Z0E9141499 No fault code found. ------------------------------------------------------------------------------- Address 19: CAN Gateway Labels: 6N0-909-901-19.LBL Controller: 6N0 909 901 Component: 0000 GATEWAY CAN 1S34 Coding: 00014 Shop #: WSC 00000 VCID: F093D3C3A3BB No fault code found. ------------------------------------------------------------------------------- Address 44: Steering Assist Labels: None Controller: 6R0 423 156 C Component: LenkhilfeTRW V278 Coding: 10110 Shop #: WSC 00000 VCID: 301393C3E33B 1 Fault Found: 00816 - Power Steering Sensor (G250) 30-10 - Open or Short to Plus - Intermittent ------------------------------------------------------------------------------- Address 56: Radio Labels: Redir Fail! Controller: 5Z0 035 152 Component: Radio BVX 005 0010 Coding: 0010200 Shop #: WSC 00000 VCID: EF91D0BFBE85 No fault code found. End --------------------------------------------------------------------------------------------------
 
Last edited by a moderator:
   #5  

fletcherlynd

New Member
Joined
Apr 5, 2024
Messages
4
Reaction score
1
Location
Bulgaria
Been here?

My guess is this car needs a steering rack.

-Uwe-
Yes, I've been there. But the question is about recoding - is this the right coding for the part (10110)? The rack seem OK to me, no noise, no vibration, no leakage. The fluid was in relatively good condition when changed, no visible broken cables or bad connections.

Few notes on the measuring blocks - turn rate remains 0 degrees when warning lamp is on and jumps on intervals when the fault is not present.

Is it a good idea to swap sensor G250 from another car and again if this is a software problem which code to use? In few threads here suggestions vary from 11210 to 11250?
 
   #6  

fletcherlynd

New Member
Joined
Apr 5, 2024
Messages
4
Reaction score
1
Location
Bulgaria
Update - the problem is now gone. It was the alternator not charging properly. It looks like power steering is sensitive on power suppy below required leveles.
 
Back
Top