- Joined
- Mar 26, 2020
- Messages
- 22
- Reaction score
- 12
- Location
- Southampton, UK
- VCDS Serial number
- C?ID=380307
2007 130 SHUTTLE BUS 2.5 5 Cylinder Cam position. "operation bring back to life"
Hi Guys, First post having sold our T2 bay thought it would be a good idea to take on a non running T5 ..slowly working though all the bits that are non working.. now need a little help. After rebuilding the engine have a cam relation with crank..fine i thought easy timing out so take the front off to look ..yep its half a tooth out..using the locking tool , have a friend take a look he said i have not lined up the train gears with the crank ..before fitting the head..hmmm so remove the cam buckets and injectors so i can turn over to try and find the correct position ..after about an hour found a place where it lined up..woop woop..all back together its runs {just} when you turn it off its like the immobiliser is cutting off the engine.. when it is running the driver is very turbo lag..then whooh away you go. still reading ???.. help.. is there any way i can phase the cam using VCDS ? also would like to disarm the immobiliser if poss...john { thanks in advance }
THINGS DONE
new cam sensor..well two really
new crank sensor
lots of swearing and many cups of tea ...lol..
ps..why is it showing BPC as engine code as its a BNZ ??
Hi Guys, First post having sold our T2 bay thought it would be a good idea to take on a non running T5 ..slowly working though all the bits that are non working.. now need a little help. After rebuilding the engine have a cam relation with crank..fine i thought easy timing out so take the front off to look ..yep its half a tooth out..using the locking tool , have a friend take a look he said i have not lined up the train gears with the crank ..before fitting the head..hmmm so remove the cam buckets and injectors so i can turn over to try and find the correct position ..after about an hour found a place where it lined up..woop woop..all back together its runs {just} when you turn it off its like the immobiliser is cutting off the engine.. when it is running the driver is very turbo lag..then whooh away you go. still reading ???.. help.. is there any way i can phase the cam using VCDS ? also would like to disarm the immobiliser if poss...john { thanks in advance }
THINGS DONE
new cam sensor..well two really
new crank sensor
lots of swearing and many cups of tea ...lol..
ps..why is it showing BPC as engine code as its a BNZ ??
Code:
Sunday,29,March,2020,12:08:30:62543
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8 x64
VCDS Version: 19.6.2.2 (x64) HEX-V2 CB: 0.4508.4
Data version: 20200210 DS308.0
www.Ross-Tech.com
VIN: WV2ZZZ7HZ8H015277 License Plate: HK
Mileage: 496710km-308641mi Repair Order: 29.03.
Chassis Type: 7H (7H - VW Transporter/Multivan (2003 > 2010))
Scan: 01 02 03 08 09 0B 0D 15 16 17 18 19 1C 22 2D 37 45 46 47 56
57 6E 76 77 78 7D
VIN: WV2ZZZ7HZ8H015277 Mileage: 496710km-308641miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 070-906-016-BPC.clb
Part No SW: 070 906 016 DS HW: 070 906 016 DS
Component: R5 2,5L EDC 000SG 1585
Revision: --H05--- Serial number: VWZ7Z0G5463049
Coding: 0001072
Shop #: WSC 80093 222 69422
VCID: 6491AC44A244FBD74DD-5184
3 Faults Found:
008581 - Engine Coolant Temp Sensor on Radiator Outlet (G83)
P2185 - 000 - Signal too High
Freeze Frame:
Fault Status: 01100000
Fault Priority: 3
Fault Frequency: 1
Reset counter: 255
Mileage: 496719 km
Time Indication: 0
Freeze Frame:
RPM: 0 /min
Speed: 0.0 km/h
Load: 0.0 %
Voltage: 12.62 V
Bin. Bits: 00000000
Temperature: 45.9°C
Temperature: 24.3°C
000833 - Camshaft Position Sensor (G40)
P0341 - 000 - Implausible Signal
Freeze Frame:
Fault Status: 01100000
Fault Priority: 3
Fault Frequency: 3
Reset counter: 255
Mileage: 496719 km
Time Indication: 0
Freeze Frame:
RPM: 504 /min
Speed: 0.0 km/h
Load: 100.0 %
Voltage: 11.17 V
Bin. Bits: 00000000
Idle Stabilization: 0.0°KW
(no units): 3.0
012296 - Camshaft Position Sensor (G40)
P3008 - 000 - Signal Out of Range - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 3
Fault Frequency: 1
Reset counter: 255
Mileage: 496719 km
Time Indication: 0
Freeze Frame:
RPM: 651 /min
Speed: 0.0 km/h
Load: 100.0 %
Voltage: 11.63 V
Bin. Bits: 00000100
Idle Stabilization: 0.0°KW
(no units): 35.0
Readiness: 0 0 0 0 1
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels:. 7H0-907-37x-ABS.clb
Part No SW: 7H0 907 379 S HW: 7H0 907 379 S
Component: (M)ABS MK25E 0103
Revision: 00H21001
Coding: 0000552
Shop #: WSC 02756 790 00000
VCID: 45D751C009BEA2DFBA3-5160
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: Redir Fail!
Part No: 7H0 820 045 AL
Component: CLIMA/AC 0303
Shop #: WSC 00000 000 00000
VCID: 6FBBD3687B82488F20F-5160
2 Faults Found:
00229 - Refrigerant Pressure
002 - Lower Limit Exceeded
01299 - Diagnostic Interface for Data Bus (J533)
013 - Check DTC Memory - Intermittent
-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels:. 7H0-937-049.lbl
Part No: 7H0 937 049 T
Component: BORDNETZ SGVER 1.0 2001
Coding: 0000101
Shop #: WSC 02756 790 00000
VCID: 43D34FD8078A9CEF947-5160
2 Faults Found:
01598 - Drive Battery Voltage
001 - Upper Limit Exceeded
01598 - Drive Battery Voltage
002 - Lower Limit Exceeded
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 1C0 909 605 A
Component: 3C AIRBAG VW51 0010
Coding: 13123
Shop #: WSC 02756
VCID: 221DEA5CFDD0B5E7FF1-5160
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 7Hx-920-xxx-17.lbl
Part No: 7H0 920 951 T
Component: KOMBI+WEGFAHRSP VDO V02
Coding: 00413
Shop #: WSC 77824
VCID: 3D273920646EEA1FE23-5160
WV2ZZZ7HZ8H015277 VWZ7Z0G5463049
1 Fault Found:
01304 - Radio
49-00 - No Communications
-------------------------------------------------------------------------------
Address 18: Aux. Heat Labels: 7H0-819-008.lbl
Part No: 7H0 815 071 F
Component: Standheizung 0209
Shop #: WSC 00000 000 00000
VCID: 2B0307788F1A74AF4C7-5160
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl
Part No: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 02756
VCID: 70B9D01463BC5777395-5160
1 Fault Found:
01304 - Radio
49-00 - No Communications
-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 7Hx-951-171.lbl
Part No: 7H0 951 171 B
Component: Innenraumueberw. 2920
Coding: 0000022
Shop #: WSC 02757 790 00000
VCID: 290FFD7085E666BFBEB-51F2
Subsystem 1 - Part No: 7H5 951 178
Component: Innenraumueberw. 1607
No fault code found.
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 7H0-959-433.lbl
Part No: 7H0 959 433 B
Component: C11 Komfortgerát 0004
Coding: 00030
Shop #: WSC 02756
VCID: 323D1A1CAD3025670F1-4B1E
No fault code found.
End----------(Elapsed Time: 06:13, VBatt start/end: 14.6V/14.5V)-----------
Last edited by a moderator: