Evening I restored video mode without camera. I checked 3x so I hope tomorrow will be video image on screen when camera will be on board. I did remove/add 56 in gateway. Remove bit 5 in [10]. Ignition off, key remove from ignition lock. Insert key, code set bit 5 in [10]. Code 5F. Exit from controller in VCDS. Click button power on on DM about 10sec to restart. Start engine. Power on DM. Select reverse gear.
Pins 6/transparent wire and 12 black to small blue quadlock socket. Gnd and reverse light from back light connector. Constant +12V from +12 cons for DM (30 terminal). I have an adapter from RCD to Mib. All above did with closed doors.
Pins 6/transparent wire and 12 black to small blue quadlock socket. Gnd and reverse light from back light connector. Constant +12V from +12 cons for DM (30 terminal). I have an adapter from RCD to Mib. All above did with closed doors.
Last edited: