Mr. Uwe,
I acquired my second-hand "Hex + Can" cable in USA. To register cable now, I need its serial number ... but I can not because I reinstalled Windows and VCDS. Now it does NOT recognize cable and does not show serial number in About section...
Cable do not have stickers, no more...
I've used cable for about 2 years with VCDS 11.11.3 - no problem.
Last week I formated my computer, reinstalled Windows 7 and I upgraded VCDS to 17.1.3. First, it only recognized cable with VCP Drivers and asked for Firmware upgrade (from 1.91 to 1.93). I did it successfully.
Now, VCDS do not recognize cable anymore ... Neither version 11.11.3, nor version 17.1.3. Neither with "Ross-Tech Direct USB Interface" driver, nor VCP driver.
Message is "Port Status: OK, USB Library Version: 03.02.07, USB Driver Version: 02.10.00, Interface: Not Found [/ B]"
Please, could you say me how can I see cable's serial number if VCDS do not recognize cable?
Pictures attached.
PS: With "Ross-Tech Direst USB Interface" driver I can see Hardware ID: "USB\VID_0403&PID_FA24&REV_0600"
Thank you.
Rogerio
https://drive.google.com/open?id=0B5...VhUOE55TUUxa3M
https://drive.google.com/open?id=0B5...nVZQXUxSzVQelU
https://drive.google.com/open?id=0B5BWhGbhSt5bRWg1RDRZQ2dYVGc
I acquired my second-hand "Hex + Can" cable in USA. To register cable now, I need its serial number ... but I can not because I reinstalled Windows and VCDS. Now it does NOT recognize cable and does not show serial number in About section...
Cable do not have stickers, no more...
I've used cable for about 2 years with VCDS 11.11.3 - no problem.
Last week I formated my computer, reinstalled Windows 7 and I upgraded VCDS to 17.1.3. First, it only recognized cable with VCP Drivers and asked for Firmware upgrade (from 1.91 to 1.93). I did it successfully.
Now, VCDS do not recognize cable anymore ... Neither version 11.11.3, nor version 17.1.3. Neither with "Ross-Tech Direct USB Interface" driver, nor VCP driver.
Message is "Port Status: OK, USB Library Version: 03.02.07, USB Driver Version: 02.10.00, Interface: Not Found [/ B]"
Please, could you say me how can I see cable's serial number if VCDS do not recognize cable?
Pictures attached.
PS: With "Ross-Tech Direst USB Interface" driver I can see Hardware ID: "USB\VID_0403&PID_FA24&REV_0600"
Thank you.
Rogerio
https://drive.google.com/open?id=0B5...VhUOE55TUUxa3M
https://drive.google.com/open?id=0B5...nVZQXUxSzVQelU
https://drive.google.com/open?id=0B5BWhGbhSt5bRWg1RDRZQ2dYVGc
Last edited by a moderator: