Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28

Thread: How to code out/remove air bag control module

  1. #21
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    3,567
    Post Thanks / Like
    Quote Originally Posted by 200tgreg View Post
    Can you please advise what this changes to as there is no pop up with info on?
    I wouldn't doubt NEtech had to dig, either in the factory repair manual ... or deep into a bag of tricks. Either way, he contributes regularly to the actual VCDS label files on an internal level and helps customers in forum frequently so I trust his suggestions and value his opinion. I would try his suggestion and if it doesn't help you can revert back.

  2. Likes Uwe liked this post
  3. #22
    Verified VCDS User
    Join Date
    Dec 2016
    Location
    UK
    Posts
    13
    Post Thanks / Like
    Quote Originally Posted by Dana View Post
    I wouldn't doubt NEtech had to dig, either in the factory repair manual ... or deep into a bag of tricks. Either way, he contributes regularly to the actual VCDS label files on an internal level and helps customers in forum frequently so I trust his suggestions and value his opinion. I would try his suggestion and if it doesn't help you can revert back.
    Oh, no I didn't mean it to sound like I was doubting NEtech. I've made the change already but was just trying to work out what was meant to change, was it to do with airbag or traction control light (or both)? Couldn't see any change with faults etc hence the question

  4. Likes Dana liked this post
  5. #23
    VCDS Distributor
    Join Date
    Feb 2014
    Location
    Denmark
    Posts
    1,678
    Post Thanks / Like
    Quote Originally Posted by 200tgreg View Post
    Can you please advise what this changes to as there is no pop up with info on?
    Can you answer if somebody changed coding ?

    The coding does not look correct for that VIN, with the former engine (source partslink, etc.). That was the reason I asked.

    "It changes to" same ABS with BJX engine, which I have in an Autoscan and can look up at some data, for that ABS and engine.
    If there should be an pop up help for coding's, it probably would need a bigger area as your screen.
    Maybe it could remove DTC's in ABS.

    Maybe not helping, but no harm testing, try:
    • coding [19] with same coding.
    • In [01] save channel 00 in [Adaptation-10]
    • coding [01] with same coding.
    • Ignition of 10 minutes.

  6. Likes Uwe, 200tgreg, Dana liked this post
  7. #24
    Verified VCDS User
    Join Date
    Dec 2016
    Location
    UK
    Posts
    13
    Post Thanks / Like
    Quote Originally Posted by NEtech View Post
    Can you answer if somebody changed coding ?

    The coding does not look correct for that VIN, with the former engine (source partslink, etc.). That was the reason I asked.

    "It changes to" same ABS with BJX engine, which I have in an Autoscan and can look up at some data, for that ABS and engine.
    If there should be an pop up help for coding's, it probably would need a bigger area as your screen.
    Maybe it could remove DTC's in ABS.

    Maybe not helping, but no harm testing, try:
    • coding [19] with same coding.
    • In [01] save channel 00 in [Adaptation-10]
    • coding [01] with same coding.
    • Ignition of 10 minutes.
    I don't know to be honest. Quite possibly, as the ABS was changed.

    Thank you for the suggestion, have tried it but still getting the below;

    Code:
    Wednesday,11,January,2017,22:44:31:10549
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 17.1.0.0 (x64)
    Data version: 20170106 DS267.0
    www.Ross-Tech.com
    
    
    VIN: TMBND46Y354216309   License Plate: 
    
    
    Chassis Type: 6Y (6L - Seat Ibiza/Cordoba (2002 > 2009))
    Scan: 01 02 03 08 09 15 17 19 25 37 44 46 55 56
     
    VIN: TMBND46Y354216309   Mileage: 149170km-92689miles
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: None
       Part No: 06A 906 032 QN
       Component: 1.8I R4/5VT         0020  
       Coding: 11500
       Shop #: WSC 33278  
       VCID: 7AFBC81D66F66C9181-5140
       VSSZZZ6LZ6R093968     SEZ7Z0E3245771
    
    2 Faults Found:
    18043 - Powertrain Data Bus 
                P1635 - 35-00 - Missing Message from A/C Controller
    18017 - Crash Shut-Down Activated 
                P1609 - 35-00 - 
    Readiness: 0000 0000
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 6R0-907-37x-ASR80.lbl
       Part No SW: 6Q0 907 379 AG    HW: 6Q0 907 379 AG
       Component: MABS 8.0 front  H04 0002  
       Revision: 00000000    Serial number: 00000000000000
       Coding: 0002241
       Shop #: WSC 06403 785 00200
       VCID: 020BB0FD5E262451D9-5124
    
    2 Faults Found:
    01317 - Control Module in Instrument Cluster (J285) 
                000 -  - 
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 194
                        Mileage: 149176 km
                        Time Indication: 0
    
    18055 - Check Coding of ECUs on Powertrain Data Bus 
                P1647 - 000 - 
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 194
                        Mileage: 149176 km
                        Time Indication: 0
    
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect.        Labels: 6Qx-937-049-C.lbl
       Part No: 6Q1 937 049 D
       Component: 0000 BN-SG.         1S34  
       Coding: 16520
       Shop #: WSC 06402  
       VCID: 3C770E052C4292A1D3-5140
    
    1 Fault Found:
    00969 - Fuse for Heated Rear Window (S41) 
                37-00 - Faulty
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 6Y0-920-xx0-17.lbl
       Part No: 6Y0 920 981 B
       Component: KOMBI+WEGFAHRSP VDO V02  
       Coding: 00401
       Shop #: WSC 13765  
       VCID: 3E73040D3A5E80B1FD-5140
       TMBND46Y354216309     SKZ7Z0D2602261
    
    2 Faults Found:
    01128 - Immobilizer Pickup Coil (D2) 
                35-00 -  - 
    01176 - Key 
                07-00 - Signal too Low
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
       Part No: 6N0 909 901 
       Component: 006A GATEWAY CAN    1S34  
       Coding: 00010
       Shop #: WSC 12345  
       VCID: 70EFEA35308A26C13F-5140
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist        Labels: 6Q0-423-156.clb
       Part No: 6Q0 423 156 M
       Component: LenkhilfeTRW        V210  
       Coding: 00121
       Shop #: WSC 13765  
       VCID: 397917112370A789C8-5140
    
    No fault code found.
    
    End-------------------------(Elapsed Time: 03:40)----------------------------

  8. #25
    Verified VCDS User
    Join Date
    Dec 2016
    Location
    UK
    Posts
    13
    Post Thanks / Like
    Hi everyone,

    Was looking through some guides today and wanted to look at the steering angle (G85) sensor specification however when I go to [03] ABS then group 05 in measuring blocks I get the below;





    Code:
    Sunday,15,January,2017,13:02:49:10549
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 17.1.1.0 (x64)
    Data version: 20170106 DS267.0
    www.Ross-Tech.com
    
    
    VIN: TMBND46Y354216309   License Plate: 
    
    
    Chassis Type: 6Y (6L - Seat Ibiza/Cordoba (2002 > 2009))
    Scan: 01 02 03 08 09 15 17 19 25 37 44 46 55 56
     
    VIN: TMBND46Y354216309   Mileage: 149170km-92689miles
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: None
       Part No: 06A 906 032 QN
       Component: 1.8I R4/5VT         0020  
       Coding: 11500
       Shop #: WSC 33278  
       VCID: 7AFBC81D66F66C919B-5140
       VSSZZZ6LZ6R093968     SEZ7Z0E3245771
    
    2 Faults Found:
    18043 - Powertrain Data Bus 
                P1635 - 35-00 - Missing Message from A/C Controller
    18017 - Crash Shut-Down Activated 
                P1609 - 35-00 - 
    Readiness: 0000 0000
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 6R0-907-37x-ASR80.lbl
       Part No SW: 6Q0 907 379 AG    HW: 6Q0 907 379 AG
       Component: MABS 8.0 front  H04 0002  
       Revision: 00000000    Serial number: 00000000000000
       Coding: 0002241
       Shop #: WSC 06403 785 00200
       VCID: 020BB0FD5E262451C3-5140
    
    2 Faults Found:
    01317 - Control Module in Instrument Cluster (J285) 
                000 -  -  - Intermittent
                 Freeze Frame:
                        Fault Status: 00100000
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 234
                        Mileage: 149176 km
                        Time Indication: 0
    
    18055 - Check Coding of ECUs on Powertrain Data Bus 
                P1647 - 000 - 
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 194
                        Mileage: 149176 km
                        Time Indication: 0
    
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect.        Labels: 6Qx-937-049-C.lbl
       Part No: 6Q1 937 049 D
       Component: 0000 BN-SG.         1S34  
       Coding: 16520
       Shop #: WSC 06402  
       VCID: 3C770E052C4292A1C9-5124
    
    1 Fault Found:
    00969 - Fuse for Heated Rear Window (S41) 
                37-00 - Faulty
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 6Y0-920-xx0-17.lbl
       Part No: 6Y0 920 981 B
       Component: KOMBI+WEGFAHRSP VDO V02  
       Coding: 00401
       Shop #: WSC 13765  
       VCID: 3E73040D3A5E80B1E7-5124
       TMBND46Y354216309     SKZ7Z0D2602261
    
    2 Faults Found:
    01128 - Immobilizer Pickup Coil (D2) 
                35-00 -  - 
    01176 - Key 
                07-00 - Signal too Low
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
       Part No: 6N0 909 901 
       Component: 006A GATEWAY CAN    1S34  
       Coding: 00010
       Shop #: WSC 12345  
       VCID: 70EFEA35308A26C125-5140
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist        Labels: 6Q0-423-156.clb
       Part No: 6Q0 423 156 M
       Component: LenkhilfeTRW        V210  
       Coding: 00121
       Shop #: WSC 13765  
       VCID: 397917112370A789D2-5140
    
    No fault code found.
    
    End-------------------------(Elapsed Time: 03:03)--------------------------
    Any ideas?

  9. #26
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,816
    Post Thanks / Like
    Blog Entries
    1
    The module you have there appears to be just an ABS with ASR, but no ESP? Is it the correct module for this car?

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  10. Likes 200tgreg liked this post
  11. #27
    Verified VCDS User
    Join Date
    Dec 2016
    Location
    UK
    Posts
    13
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    The module you have there appears to be just an ABS with ASR, but no ESP, so probably no steering angle sensor.

    -Uwe-
    Ah that would indeed make sense (Doh!). Thank you.

    So what else can I do at the moment? Other than work through the wiring to clear the airbag fault - what about this error: "18055 - Check Coding of ECUs on Powertrain Data Bus P1647"

    I do really appreciate all the help with this, thank you all!

  12. #28
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    3,567
    Post Thanks / Like
    I do not have any additional suggestions but we received the Engine module control module maps. Thanks for sending those over!

    Internal Ref to: FS#1273

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •