-
Benevolent Dictator

Originally Posted by
bluestar
Is there a place in the software that will tell me how many VINs are permanently stored on my 3-VIN or 10-VIN
VCDS?
Will the the software show that my
VCDS has unlimited VINs if I pay for the upgrade from 10-VIN to unlimited?
Yes, as of version 17.1, the VIN status is shown on the About screen.
-Uwe-
The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.
-
Post Thanks / Like - 1 Likes
-

Originally Posted by
Uwe
Yes, as of version 17.1, the VIN status is shown on the About screen.
-Uwe-
I updated to v17.1 and plugged in my HEX+CAN-USB with unlimited VINs. The About screen shows the Serial # and License Status (Valid/Activated), but no VIN status. Will VIN Status only be revealed for the new HEX-V2s?
-
As the HEX-USB+CAN is unlimited in VIN count, the software does not show anything about VINs with that interface. Only the new interfaces show the VIN counts.
-
Post Thanks / Like - 2 Likes
-
There might be a glitch in the interface, I have the 3 vin cable here are the things I have done on two cars so far.......suspension adaptation, head lights adjustments, SRI reset, output tests, and a few code changes and so far it hasn't registered a vin still shows 0/3
-
Benevolent Dictator

Originally Posted by
AlmiR
There might be a glitch in the interface, I have the 3 vin cable here are the things I have done on two cars so far.......suspension adaptation, head lights adjustments, SRI reset, output tests, and a few code changes and so far it hasn't registered a vin still shows 0/3

What cars were they?
-Uwe-
The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.
-
-
Benevolent Dictator

Originally Posted by
AlmiR
04 audi a8l
Hmm, that's a bit surprising. Mind posting an Auto-Scan from one, or even both? Maybe in the Reference Scans section?
-Uwe-
The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.
-
-
Post Thanks / Like - 1 Likes
Uwe liked this post
-
Does viewing the timing graph for VE engines count towards using a VIN allotment? Basic settings have to be used but nothing is being changed with VCDS, so just looking for clarification.
-
Benevolent Dictator

Originally Posted by
Chris@Roseland
Does viewing the
timing graph for
VE engines count towards using a VIN allotment? Basic settings have to be used but nothing is being changed with
VCDS, so just looking for clarification.
Good question. I don't have a definitive answer, nor do I think we have a VE engine around to try this on.
I will say this though: Most VE ECUs don't know their own VIN (1996-2001). Generally only 2002 and 2003 ECUs do, and after that, NAR models were all PD, right?
-Uwe-
The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.