Last Saterday I read out a Skoda Octavia build 2006
First I made a autoscan and I saved the file.
Then it was the meaning to change a light setting in module 09.
When changing a bit and want to save this setting there is a fault code that the number of the WSC is incorrect.
This is a part of the scan:
Address 09: Cent. Elect. Labels: 3C0-937-049-23-H.lbl
Part No SW: 3C0 937 049 E HW: 3C0 937 049 E
Component: Bordnetz-SG H37 1002
Revision: 00H37000 Serial number: 00000004369703
Coding: C9880F230004140000110D000000000000197F075C
Shop #: WSC 99999 999 789888
VCID: 2B55F0A48AFAF4461E5-807E
The problem is that the numer 789888 is out of range.
How can that be changed?
First I made a autoscan and I saved the file.
Then it was the meaning to change a light setting in module 09.
When changing a bit and want to save this setting there is a fault code that the number of the WSC is incorrect.
This is a part of the scan:
Address 09: Cent. Elect. Labels: 3C0-937-049-23-H.lbl
Part No SW: 3C0 937 049 E HW: 3C0 937 049 E
Component: Bordnetz-SG H37 1002
Revision: 00H37000 Serial number: 00000004369703
Coding: C9880F230004140000110D000000000000197F075C
Shop #: WSC 99999 999 789888
VCID: 2B55F0A48AFAF4461E5-807E
The problem is that the numer 789888 is out of range.
How can that be changed?