My cruise control has completely stopped working.
The DIS acts as if there is no input from the CC stalk whatsoever...
I have only one fault code; this comes back instantaneously after clearing it. Does anyone have any ideas as to what is wrong?
The DIS acts as if there is no input from the CC stalk whatsoever...
I have only one fault code; this comes back instantaneously after clearing it. Does anyone have any ideas as to what is wrong?
Code:
Wednesday,14,December,2016,13:01:01:21361
VCDS Version: Release 16.8.4 (x64) Running on Windows 10 x64
www.Ross-Tech.com
Address 01: Engine Labels: 07K-907-309-V1.clb
Control Module Part Number: 8V0 907 404 HW: 07K 907 309 C
Component and/or Version: 2.5l R5/4V TF H52 0005
Software Coding: 12250032252601033600
Work Shop Code: WSC 06314 790 00021
ASAM Dataset: EV_ECM25TFS0118V0907404 001006 (AU37)
ROD: EV_ECM25TFS011_AU37.rod
VCID: 76E38887C9944CF2E3-8022
Fault Codes have been Erased
1 Fault Found:
17165 - Databus
U1123 00 [039] - Received Error Message
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Mileage: 7838 km
Date: 2016.12.14
Time: 13:00:56
Engine speed: 0.00 /min
Normed load value: 0.0 %
Vehicle speed: 0 km/h
Coolant temperature: 84 ∞C
Intake air temperature: 60 ∞C
Ambient air pressure: 1000 mbar
Voltage terminal 30: 12.320 V
Unlearning counter according OBD: 40
ACC variants-Bit 0: 0
CCS Switch-Bit 0: 1
Cruise control switch actuation-Bit 0: 0
Cruise control switch actuation-Bit 8: 49
ACC variants (coding)-Bit 0: 1
Readiness: 1110 0000