Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 31

Thread: Audi A7 2016 66 Reg Hidden Menu

  1. #21
    Verified VCDS User
    Join Date
    Oct 2016
    Location
    UK
    Posts
    34
    Post Thanks / Like
    Any progress Dana ?, have I given you the info ?

  2. #22
    Verified VCDS User
    Join Date
    Mar 2016
    Location
    UK
    Posts
    149
    Post Thanks / Like
    Green Menu on MIB2 is activated by enabled Developing Mode in Adaption Channel in 5F then holding the Engineering mode Keys down for at least 20 seconds. I think its NAV up and MEDIA down. hold them simultaneously for 20 seconds.

    However, Green Menu doesnt offer much like the old green menu now in MIB2. Activating new options in the MIB2 is driven primarily from coding and adaption channel changes now.

    HTH

    Andy

  3. #23
    Verified VCDS User rlarsen's Avatar
    Join Date
    May 2015
    Location
    Copenhagen, Denmark
    Posts
    283
    Post Thanks / Like
    Quote Originally Posted by andyhud View Post
    Green Menu on MIB2 is activated by enabled Developing Mode in Adaption Channel in 5F then holding the Engineering mode Keys down for at least 20 seconds. I think its NAV up and MEDIA down. hold them simultaneously for 20 seconds.

    However, Green Menu doesnt offer much like the old green menu now in MIB2. Activating new options in the MIB2 is driven primarily from coding and adaption channel changes now.

    HTH

    Andy
    Hidden menu (Green menu) is NAV/MAP (or CAR) + RADIO
    Engineering Menu is NAV/Map (or CAR) + MEDIA

    http://forums.ross-tech.com/showthre...ll=1#post91232
    Rene Larsen

    Audi A4 Avant 3.0 TDI quattro tiptronic MY2009 - sold
    VCDS 19.6.2
    (HEX-V2)

  4. Likes Uwe liked this post
  5. #24
    Verified VCDS User
    Join Date
    Oct 2016
    Location
    UK
    Posts
    34
    Post Thanks / Like
    Hey Folks

    Great work, I can now confirm back and the bottom left of the silver keys gets you into the hidden green menu, it's changed dramatically, so can't see anywhere to do mods but we are progressing, thank you folks

  6. #25
    Verified VCDS User
    Join Date
    Oct 2016
    Location
    UK
    Posts
    34
    Post Thanks / Like
    Anymore info on the window closure issue ?

    Thanks

  7. #26
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    3,632
    Post Thanks / Like
    Quote Originally Posted by satpat2 View Post
    Hey Dana

    here is the Measuring Blocks log for 42 and 52, carried out the output test and window going down and up on 42 and 52 as well as folding door mirrors
    MVB 002 in the logs are correct
    Code:
    Mileage:    Repair Order: Log 42
    
                    Address 42: Door Elect, Driver  (4G8 959 793 H)
    
    10:13:59 Group 001
      00000000  Bin. Bits 
      00000000  Bin. Bits 
          0101  Bin. Bits 
      12.00 V  Voltage 
    
    10:13:59 Group 002
      Not Oper.    
      Not Oper.    
      Not Oper.    
      Not Oper.    
    
    10:13:59 Group 003
      0.0 %  Load 
      11.0C  Temperature 
          1101  Bin. Bits 
      Still
    Code:
    Mileage:    Repair Order: 52
    
                    Address 52: Door Elect, Pass.  (4G8 959 792 J)
    
    10:23:02 Group 001
      00000000  Bin. Bits 
      00000000  Bin. Bits 
          0101  Bin. Bits 
      12.16 V  Voltage 
    
    10:23:02 Group 002
      Not Oper.    
      Not Installed    
      Not Installed    
      Not Installed    
    
    10:23:02 Group 003
      0.0 %  Load 
      10.0C  Temperature 
          1101  Bin. Bits 
      Still
    ... but I was looking to see if all of the switch positions (Auto Open/Auto Close/Manual Open/Manual Close/Not Oper.) were shown when the switches are operated. The only switch position that really maters is Auto - but making sure all positions are recognized isn't a bad idea. At this point it does confirm the correct group number based on the Not Oper. data.

    Also, did you try with the factory condition 46: Central Conv. coding in post # 16?

  8. Likes Uwe liked this post
  9. #27
    Verified VCDS User
    Join Date
    Oct 2016
    Location
    UK
    Posts
    34
    Post Thanks / Like
    I haven't tried this yet but it has never worked from factory, should I take it back in and get them to have a look as it's still in warranty ?

  10. #28
    Verified VCDS User
    Join Date
    Mar 2016
    Location
    UK
    Posts
    149
    Post Thanks / Like
    Quote Originally Posted by satpat2 View Post
    Hey Folks

    Great work, I can now confirm back and the bottom left of the silver keys gets you into the hidden green menu, it's changed dramatically, so can't see anywhere to do mods but we are progressing, thank you folks
    You'll find to enable "new" menu options in the MIB2, that is driven from enabling adaption channels in 5F along with the correct Terminal (in most cases its Terminal 15)

    If you scroll through them to see ones that are enabled from factory you can duplicate for ones that arent.

    Cheers

    Andy

  11. #29
    Verified VCDS User
    Join Date
    Oct 2016
    Location
    UK
    Posts
    34
    Post Thanks / Like
    Quote Originally Posted by andyhud View Post
    You'll find to enable "new" menu options in the MIB2, that is driven from enabling adaption channels in 5F along with the correct Terminal (in most cases its Terminal 15)

    If you scroll through them to see ones that are enabled from factory you can duplicate for ones that arent.

    Cheers

    Andy
    Quote Originally Posted by Dana View Post
    MVB 002 in the logs are correct
    Code:
    Mileage:    Repair Order: Log 42
    
                    Address 42: Door Elect, Driver  (4G8 959 793 H)
    
    10:13:59 Group 001
      00000000  Bin. Bits 
      00000000  Bin. Bits 
          0101  Bin. Bits 
      12.00 V  Voltage 
    
    10:13:59 Group 002
      Not Oper.    
      Not Oper.    
      Not Oper.    
      Not Oper.    
    
    10:13:59 Group 003
      0.0 %  Load 
      11.0C  Temperature 
          1101  Bin. Bits 
      Still
    Code:
    Mileage:    Repair Order: 52
    
                    Address 52: Door Elect, Pass.  (4G8 959 792 J)
    
    10:23:02 Group 001
      00000000  Bin. Bits 
      00000000  Bin. Bits 
          0101  Bin. Bits 
      12.16 V  Voltage 
    
    10:23:02 Group 002
      Not Oper.    
      Not Installed    
      Not Installed    
      Not Installed    
    
    10:23:02 Group 003
      0.0 %  Load 
      10.0C  Temperature 
          1101  Bin. Bits 
      Still
    ... but I was looking to see if all of the switch positions (Auto Open/Auto Close/Manual Open/Manual Close/Not Oper.) were shown when the switches are operated. The only switch position that really maters is Auto - but making sure all positions are recognized isn't a bad idea. At this point it does confirm the correct group number based on the Not Oper. data.

    Also, did you try with the factory condition 46: Central Conv. coding in post # 16?
    Tried your recommendations but still not working, I have left window regulator active on, still no change

  12. #30
    Verified VCDS User
    Join Date
    Oct 2016
    Location
    UK
    Posts
    34
    Post Thanks / Like
    Hey Guys, I have enabled audi smartphone and its brilliant, works great, wondering why this was never enabled ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •