Was gettng fault code:
00516 closed throttle (idle) position switch f60 2700 implausible signal
Ive removed the throttle body on a 1.4 16v ahw, cleaned it and refitted. Used a pole to hold accelerator down, pulled the cable back just to the point were throttle body butterfly was open.
Heres a vid off the vcds process, am now getting basic setting not complete error, the engine refuses to idle and cuts out
00516 closed throttle (idle) position switch f60 2700 implausible signal
Ive removed the throttle body on a 1.4 16v ahw, cleaned it and refitted. Used a pole to hold accelerator down, pulled the cable back just to the point were throttle body butterfly was open.
Heres a vid off the vcds process, am now getting basic setting not complete error, the engine refuses to idle and cuts out