Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: TBA

  1. #11
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,770
    Post Thanks / Like
    You are not supposed to do the ADP with the engine running!

    I liked your post because it's funny.......
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  2. Likes MartinsX liked this post
  3. #12
    Verified VCDS User
    Join Date
    Sep 2016
    Location
    Riga, Latvia
    Posts
    760
    Post Thanks / Like
    It is another TB showing the same fault code?

  4. #13
    Verified VCDS-Lite User
    Join Date
    Aug 2016
    Location
    UK
    Posts
    48
    Post Thanks / Like
    Quote Originally Posted by Jack@European_Parts View Post
    You are not supposed to do the ADP with the engine running!

    I liked your post because it's funny.......


    i didnt.... sorry jack, it means the code only returns after the engine has been started

  5. #14
    Verified VCDS-Lite User
    Join Date
    Aug 2016
    Location
    UK
    Posts
    48
    Post Thanks / Like
    it started off with

    Code:
    00516 closed throttle (idle) position switch f60 2700 implausible signal
    
    00532 supply voltage b+ 07-10 signal to low intermittent

    after the throttle body clean

    Code:
    00282 - Throttle Position Actuator (V60)
    26-00 - Output Open
    but it was reading as part throttle with the cable disconnected, and changed to idle once pins 3 and 7 were briged

    throttle body from breakers was fitted, it now shows as idle in vcds but still shows error in adaptation idle/error field

    and this code if the engine has been started, after codes have been cleared

    Code:
    00282 - Throttle Position Actuator(V60)
    26-00 - Output Open

  6. #15
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    16,770
    Post Thanks / Like
    If all fuse ok ..........
    Time for a TV, harness damage, or ECU.
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  7. Likes MartinsX liked this post
  8. #16
    Verified VCDS-Lite User
    Join Date
    Aug 2016
    Location
    UK
    Posts
    48
    Post Thanks / Like
    had some help, looking for a second opinion. Would you guys agree that the following results from measuring blocks point towards a faulty replacement throttle body?

    Code:
     005 zone 4 tv cal. xx000000 = 00000100

  9. #17
    Verified VCDS-Lite User
    Join Date
    Aug 2016
    Location
    UK
    Posts
    48
    Post Thanks / Like
    got there in the end, turned out to be a fault with the wiring/plug at the throttle body

  10. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •